This is the latest recevied telemetry packets stored in our database for station/object F5MIW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793314100 | 173 Count | 526 Count | 152 Count | 0 VDC | 0 VDC |
| 1793310495 | 159 Count | 487 Count | 139 Count | 0 VDC | 0 VDC |
| 1793306891 | 147 Count | 446 Count | 128 Count | 0 VDC | 0 VDC |
| 1793303287 | 136 Count | 409 Count | 118 Count | 0 VDC | 0 VDC |
| 1793299708 | 124 Count | 384 Count | 109 Count | 0 VDC | 0 VDC |
| 1793296104 | 116 Count | 355 Count | 104 Count | 0 VDC | 0 VDC |
| 1793292500 | 106 Count | 317 Count | 97 Count | 0 VDC | 0 VDC |
| 1793288896 | 96 Count | 280 Count | 88 Count | 0 VDC | 0 VDC |
| 1793285291 | 83 Count | 234 Count | 76 Count | 0 VDC | 0 VDC |
| 1793281687 | 70 Count | 184 Count | 64 Count | 0 VDC | 0 VDC |
| 1793278110 | 58 Count | 154 Count | 53 Count | 0 VDC | 0 VDC |
| 1793274506 | 47 Count | 123 Count | 43 Count | 0 VDC | 0 VDC |
| 1793270901 | 36 Count | 100 Count | 33 Count | 0 VDC | 0 VDC |
| 1793267297 | 25 Count | 66 Count | 23 Count | 0 VDC | 0 VDC |
| 1793263693 | 10 Count | 26 Count | 9 Count | 0 VDC | 0 VDC |
| 1793260089 | 0 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1793256501 | 528 Count | 981 Count | 433 Count | 0 VDC | 0 VDC |
| 1793252897 | 517 Count | 948 Count | 423 Count | 0 VDC | 0 VDC |
| 1793249293 | 505 Count | 918 Count | 412 Count | 0 VDC | 0 VDC |
| 1793245689 | 492 Count | 888 Count | 400 Count | 0 VDC | 0 VDC |
| 1793242084 | 480 Count | 853 Count | 389 Count | 0 VDC | 0 VDC |
| 1793238480 | 467 Count | 822 Count | 377 Count | 0 VDC | 0 VDC |
| 1793234901 | 456 Count | 800 Count | 367 Count | 0 VDC | 0 VDC |
| 1793231297 | 445 Count | 777 Count | 357 Count | 0 VDC | 0 VDC |
| 1793227693 | 433 Count | 754 Count | 346 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)