This is the latest recevied telemetry packets stored in our database for station/object SQ4VK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765492953 | 928 Count | 193 Count | 34 Count | 0 VDC | 0 VDC |
| 1765492053 | 921 Count | 192 Count | 34 Count | 0 VDC | 0 VDC |
| 1765491152 | 914 Count | 190 Count | 34 Count | 0 VDC | 0 VDC |
| 1765490251 | 908 Count | 187 Count | 34 Count | 0 VDC | 0 VDC |
| 1765489351 | 903 Count | 186 Count | 34 Count | 0 VDC | 0 VDC |
| 1765488450 | 895 Count | 185 Count | 34 Count | 0 VDC | 0 VDC |
| 1765487549 | 889 Count | 184 Count | 34 Count | 0 VDC | 0 VDC |
| 1765486648 | 883 Count | 182 Count | 34 Count | 0 VDC | 0 VDC |
| 1765485748 | 876 Count | 181 Count | 34 Count | 0 VDC | 0 VDC |
| 1765484847 | 870 Count | 180 Count | 34 Count | 0 VDC | 0 VDC |
| 1765483946 | 865 Count | 179 Count | 34 Count | 0 VDC | 0 VDC |
| 1765483064 | 856 Count | 177 Count | 34 Count | 0 VDC | 0 VDC |
| 1765482163 | 851 Count | 176 Count | 34 Count | 0 VDC | 0 VDC |
| 1765481262 | 845 Count | 176 Count | 34 Count | 0 VDC | 0 VDC |
| 1765480361 | 838 Count | 175 Count | 34 Count | 0 VDC | 0 VDC |
| 1765479461 | 831 Count | 174 Count | 34 Count | 0 VDC | 0 VDC |
| 1765478560 | 826 Count | 173 Count | 34 Count | 0 VDC | 0 VDC |
| 1765477659 | 818 Count | 172 Count | 34 Count | 0 VDC | 0 VDC |
| 1765476759 | 813 Count | 171 Count | 34 Count | 0 VDC | 0 VDC |
| 1765475858 | 806 Count | 170 Count | 34 Count | 0 VDC | 0 VDC |
| 1765474957 | 800 Count | 170 Count | 34 Count | 0 VDC | 0 VDC |
| 1765474056 | 793 Count | 169 Count | 34 Count | 0 VDC | 0 VDC |
| 1765473155 | 788 Count | 169 Count | 34 Count | 0 VDC | 0 VDC |
| 1765472254 | 781 Count | 169 Count | 34 Count | 0 VDC | 0 VDC |
| 1765471452 | 775 Count | 168 Count | 34 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)