This is the latest recevied telemetry packets stored in our database for station/object SP8KSR-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785043699 | 644 Count | 694 Count | 644 Count | 0 VDC | 0 VDC |
| 1785041899 | 620 Count | 668 Count | 620 Count | 0 VDC | 0 VDC |
| 1785040099 | 590 Count | 636 Count | 590 Count | 0 VDC | 0 VDC |
| 1785038299 | 562 Count | 605 Count | 562 Count | 0 VDC | 0 VDC |
| 1785036499 | 529 Count | 570 Count | 529 Count | 0 VDC | 0 VDC |
| 1785034698 | 499 Count | 538 Count | 499 Count | 0 VDC | 0 VDC |
| 1785032898 | 475 Count | 512 Count | 475 Count | 0 VDC | 0 VDC |
| 1785031097 | 443 Count | 478 Count | 443 Count | 0 VDC | 0 VDC |
| 1785029297 | 411 Count | 444 Count | 411 Count | 0 VDC | 0 VDC |
| 1785027497 | 374 Count | 404 Count | 374 Count | 0 VDC | 0 VDC |
| 1785025697 | 342 Count | 371 Count | 342 Count | 0 VDC | 0 VDC |
| 1785023897 | 314 Count | 341 Count | 314 Count | 0 VDC | 0 VDC |
| 1785022098 | 281 Count | 307 Count | 281 Count | 0 VDC | 0 VDC |
| 1785020298 | 250 Count | 274 Count | 250 Count | 0 VDC | 0 VDC |
| 1785018498 | 219 Count | 240 Count | 219 Count | 0 VDC | 0 VDC |
| 1785016698 | 187 Count | 206 Count | 187 Count | 0 VDC | 0 VDC |
| 1785014898 | 163 Count | 180 Count | 163 Count | 0 VDC | 0 VDC |
| 1785013098 | 140 Count | 155 Count | 140 Count | 0 VDC | 0 VDC |
| 1785011298 | 120 Count | 133 Count | 120 Count | 0 VDC | 0 VDC |
| 1785009497 | 95 Count | 105 Count | 95 Count | 0 VDC | 0 VDC |
| 1785007697 | 70 Count | 78 Count | 70 Count | 0 VDC | 0 VDC |
| 1785005897 | 47 Count | 52 Count | 47 Count | 0 VDC | 0 VDC |
| 1785004097 | 21 Count | 23 Count | 21 Count | 0 VDC | 0 VDC |
| 1785002297 | 0 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1785000495 | 337 Count | 971 Count | 337 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)