This is the latest recevied telemetry packets stored in our database for station/object SP8NCG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792518692 | 16 Count | 9 Count | 0 Count | 0 VDC | 0 VDC |
| 1792516900 | 11 Count | 6 Count | 0 Count | 0 VDC | 0 VDC |
| 1792515100 | 4 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1792513299 | 1001 Count | 906 Count | 0 Count | 0 VDC | 0 VDC |
| 1792511498 | 994 Count | 903 Count | 0 Count | 0 VDC | 0 VDC |
| 1792509697 | 989 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1792507896 | 982 Count | 867 Count | 0 Count | 0 VDC | 0 VDC |
| 1792506096 | 978 Count | 850 Count | 0 Count | 0 VDC | 0 VDC |
| 1792504295 | 971 Count | 828 Count | 0 Count | 0 VDC | 0 VDC |
| 1792502494 | 967 Count | 823 Count | 0 Count | 0 VDC | 0 VDC |
| 1792500693 | 960 Count | 802 Count | 0 Count | 0 VDC | 0 VDC |
| 1792498892 | 955 Count | 787 Count | 0 Count | 0 VDC | 0 VDC |
| 1792497092 | 950 Count | 783 Count | 0 Count | 0 VDC | 0 VDC |
| 1792473700 | 862 Count | 531 Count | 0 Count | 0 VDC | 0 VDC |
| 1792471899 | 855 Count | 527 Count | 0 Count | 0 VDC | 0 VDC |
| 1792470098 | 850 Count | 524 Count | 0 Count | 0 VDC | 0 VDC |
| 1792468298 | 843 Count | 521 Count | 0 Count | 0 VDC | 0 VDC |
| 1792466497 | 838 Count | 518 Count | 0 Count | 0 VDC | 0 VDC |
| 1792464696 | 831 Count | 515 Count | 0 Count | 0 VDC | 0 VDC |
| 1792462895 | 826 Count | 512 Count | 0 Count | 0 VDC | 0 VDC |
| 1792461094 | 819 Count | 509 Count | 0 Count | 0 VDC | 0 VDC |
| 1792459294 | 814 Count | 506 Count | 0 Count | 0 VDC | 0 VDC |
| 1792457493 | 807 Count | 503 Count | 0 Count | 0 VDC | 0 VDC |
| 1792455692 | 802 Count | 500 Count | 0 Count | 0 VDC | 0 VDC |
| 1792453891 | 797 Count | 497 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)