This is the latest recevied telemetry packets stored in our database for station/object IW2HTZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792556762 | 25 Count | 261 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792554958 | 23 Count | 241 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792553150 | 21 Count | 205 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792552232 | 20 Count | 178 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792546808 | 14 Count | 126 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792544996 | 12 Count | 109 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792543189 | 10 Count | 91 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792542285 | 9 Count | 82 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792541474 | 8 Count | 76 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792539667 | 6 Count | 62 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792536955 | 3 Count | 32 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792536055 | 2 Count | 21 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792534243 | 0 Count | 9 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792533344 | 126 Count | 1007 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792531532 | 124 Count | 979 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792530628 | 123 Count | 969 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792527012 | 119 Count | 931 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792526108 | 118 Count | 923 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792525204 | 117 Count | 912 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792524300 | 116 Count | 903 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792523397 | 115 Count | 888 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792520685 | 112 Count | 868 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792516259 | 107 Count | 827 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792515355 | 106 Count | 820 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792514451 | 105 Count | 798 Count | 0 Count | 0.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)