This is the latest recevied telemetry packets stored in our database for station/object IW2HTZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789354474 | 9 Count | 74 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789353570 | 8 Count | 65 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789352666 | 7 Count | 56 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789350854 | 5 Count | 41 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789349950 | 4 Count | 36 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789346339 | 0 Count | 7 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789345435 | 136 Count | 1004 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789344531 | 135 Count | 997 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789339211 | 129 Count | 952 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789333787 | 123 Count | 913 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789331075 | 120 Count | 888 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789330171 | 119 Count | 880 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789329268 | 118 Count | 870 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789326556 | 115 Count | 849 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789324748 | 113 Count | 837 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789323844 | 112 Count | 831 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789321122 | 109 Count | 793 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789320833 | 108 Count | 790 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789319932 | 107 Count | 785 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789319024 | 106 Count | 774 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789318124 | 105 Count | 766 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789315788 | 102 Count | 745 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789313080 | 99 Count | 721 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789311272 | 97 Count | 704 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1789307653 | 93 Count | 670 Count | 0 Count | 0.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)