This is the latest recevied telemetry packets stored in our database for station/object MB7USU-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792536632 | 235 Count | 362 Count | 193 Count | 0 VDC | 0 VDC |
| 1792531230 | 226 Count | 344 Count | 187 Count | 0 VDC | 0 VDC |
| 1792529436 | 223 Count | 338 Count | 185 Count | 0 VDC | 0 VDC |
| 1792527636 | 220 Count | 332 Count | 183 Count | 0 VDC | 0 VDC |
| 1792525835 | 217 Count | 326 Count | 181 Count | 0 VDC | 0 VDC |
| 1792524034 | 211 Count | 317 Count | 176 Count | 0 VDC | 0 VDC |
| 1792522234 | 208 Count | 311 Count | 174 Count | 0 VDC | 0 VDC |
| 1792520433 | 204 Count | 304 Count | 171 Count | 0 VDC | 0 VDC |
| 1792518632 | 195 Count | 292 Count | 163 Count | 0 VDC | 0 VDC |
| 1792516832 | 192 Count | 286 Count | 161 Count | 0 VDC | 0 VDC |
| 1792515031 | 189 Count | 280 Count | 159 Count | 0 VDC | 0 VDC |
| 1792513230 | 186 Count | 274 Count | 157 Count | 0 VDC | 0 VDC |
| 1792511430 | 183 Count | 268 Count | 155 Count | 0 VDC | 0 VDC |
| 1792509629 | 179 Count | 261 Count | 152 Count | 0 VDC | 0 VDC |
| 1792507837 | 176 Count | 256 Count | 150 Count | 0 VDC | 0 VDC |
| 1792506036 | 142 Count | 219 Count | 117 Count | 0 VDC | 0 VDC |
| 1792504235 | 116 Count | 190 Count | 92 Count | 0 VDC | 0 VDC |
| 1792502434 | 113 Count | 184 Count | 90 Count | 0 VDC | 0 VDC |
| 1792500634 | 110 Count | 178 Count | 88 Count | 0 VDC | 0 VDC |
| 1792498833 | 107 Count | 172 Count | 86 Count | 0 VDC | 0 VDC |
| 1792497032 | 104 Count | 166 Count | 84 Count | 0 VDC | 0 VDC |
| 1792495232 | 101 Count | 160 Count | 82 Count | 0 VDC | 0 VDC |
| 1792493431 | 74 Count | 130 Count | 56 Count | 0 VDC | 0 VDC |
| 1792491630 | 67 Count | 121 Count | 50 Count | 0 VDC | 0 VDC |
| 1792489829 | 64 Count | 115 Count | 48 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)