This is the latest recevied telemetry packets stored in our database for station/object MB7USU-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791562804 | 99 Count | 95 Count | 95 Count | 0 VDC | 0 VDC |
| 1791561004 | 97 Count | 94 Count | 94 Count | 0 VDC | 0 VDC |
| 1791559203 | 95 Count | 93 Count | 93 Count | 0 VDC | 0 VDC |
| 1791557409 | 88 Count | 87 Count | 87 Count | 0 VDC | 0 VDC |
| 1791555608 | 2 Count | 2 Count | 2 Count | 0 VDC | 0 VDC |
| 1791553808 | 1051 Count | 932 Count | 932 Count | 0 VDC | 0 VDC |
| 1791552007 | 998 Count | 880 Count | 880 Count | 0 VDC | 0 VDC |
| 1791550206 | 946 Count | 829 Count | 829 Count | 0 VDC | 0 VDC |
| 1791548405 | 944 Count | 828 Count | 828 Count | 0 VDC | 0 VDC |
| 1791546605 | 942 Count | 827 Count | 827 Count | 0 VDC | 0 VDC |
| 1791544804 | 882 Count | 768 Count | 768 Count | 0 VDC | 0 VDC |
| 1791543003 | 798 Count | 685 Count | 685 Count | 0 VDC | 0 VDC |
| 1791541203 | 785 Count | 673 Count | 673 Count | 0 VDC | 0 VDC |
| 1791539402 | 784 Count | 673 Count | 673 Count | 0 VDC | 0 VDC |
| 1791537601 | 782 Count | 672 Count | 672 Count | 0 VDC | 0 VDC |
| 1791535809 | 780 Count | 671 Count | 671 Count | 0 VDC | 0 VDC |
| 1791534008 | 778 Count | 670 Count | 670 Count | 0 VDC | 0 VDC |
| 1791532207 | 776 Count | 669 Count | 669 Count | 0 VDC | 0 VDC |
| 1791530407 | 774 Count | 668 Count | 668 Count | 0 VDC | 0 VDC |
| 1791528606 | 773 Count | 668 Count | 668 Count | 0 VDC | 0 VDC |
| 1791526805 | 770 Count | 666 Count | 666 Count | 0 VDC | 0 VDC |
| 1791525005 | 768 Count | 665 Count | 665 Count | 0 VDC | 0 VDC |
| 1791523204 | 766 Count | 664 Count | 664 Count | 0 VDC | 0 VDC |
| 1791521403 | 764 Count | 663 Count | 663 Count | 0 VDC | 0 VDC |
| 1791519603 | 762 Count | 662 Count | 662 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)