This is the latest recevied telemetry packets stored in our database for station/object SP2ROC-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775162081 | 16 Count | 22 Count | 12 Count | 0 VDC | 0 VDC |
| 1775161661 | 12 Count | 16 Count | 9 Count | 0 VDC | 0 VDC |
| 1775161240 | 10 Count | 14 Count | 8 Count | 0 VDC | 0 VDC |
| 1775160820 | 4 Count | 5 Count | 3 Count | 0 VDC | 0 VDC |
| 1775160399 | 2 Count | 4 Count | 2 Count | 0 VDC | 0 VDC |
| 1775159979 | 437 Count | 1003 Count | 296 Count | 0 VDC | 0 VDC |
| 1775159558 | 434 Count | 999 Count | 294 Count | 0 VDC | 0 VDC |
| 1775159137 | 431 Count | 995 Count | 292 Count | 0 VDC | 0 VDC |
| 1775158717 | 428 Count | 992 Count | 290 Count | 0 VDC | 0 VDC |
| 1775158296 | 425 Count | 988 Count | 288 Count | 0 VDC | 0 VDC |
| 1775157875 | 421 Count | 982 Count | 285 Count | 0 VDC | 0 VDC |
| 1775157455 | 418 Count | 980 Count | 283 Count | 0 VDC | 0 VDC |
| 1775157034 | 414 Count | 974 Count | 280 Count | 0 VDC | 0 VDC |
| 1775156614 | 411 Count | 971 Count | 279 Count | 0 VDC | 0 VDC |
| 1775154364 | 388 Count | 945 Count | 265 Count | 0 VDC | 0 VDC |
| 1775153943 | 387 Count | 945 Count | 265 Count | 0 VDC | 0 VDC |
| 1775153523 | 382 Count | 938 Count | 261 Count | 0 VDC | 0 VDC |
| 1775153102 | 380 Count | 935 Count | 260 Count | 0 VDC | 0 VDC |
| 1775152681 | 376 Count | 930 Count | 257 Count | 0 VDC | 0 VDC |
| 1775152261 | 374 Count | 928 Count | 256 Count | 0 VDC | 0 VDC |
| 1775151840 | 369 Count | 921 Count | 252 Count | 0 VDC | 0 VDC |
| 1775151420 | 367 Count | 918 Count | 251 Count | 0 VDC | 0 VDC |
| 1775150999 | 364 Count | 915 Count | 249 Count | 0 VDC | 0 VDC |
| 1775150578 | 360 Count | 910 Count | 246 Count | 0 VDC | 0 VDC |
| 1775150158 | 357 Count | 907 Count | 244 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)