This is the latest recevied telemetry packets stored in our database for station/object SP2ROC-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789368365 | 243 Count | 756 Count | 158 Count | 0 VDC | 0 VDC |
| 1789368064 | 241 Count | 752 Count | 157 Count | 0 VDC | 0 VDC |
| 1789367763 | 239 Count | 745 Count | 156 Count | 0 VDC | 0 VDC |
| 1789367463 | 236 Count | 736 Count | 154 Count | 0 VDC | 0 VDC |
| 1789367161 | 233 Count | 730 Count | 152 Count | 0 VDC | 0 VDC |
| 1789366861 | 230 Count | 721 Count | 150 Count | 0 VDC | 0 VDC |
| 1789366560 | 227 Count | 712 Count | 148 Count | 0 VDC | 0 VDC |
| 1789366260 | 225 Count | 708 Count | 147 Count | 0 VDC | 0 VDC |
| 1789365958 | 223 Count | 701 Count | 146 Count | 0 VDC | 0 VDC |
| 1789365657 | 220 Count | 688 Count | 144 Count | 0 VDC | 0 VDC |
| 1789365357 | 217 Count | 681 Count | 142 Count | 0 VDC | 0 VDC |
| 1789365056 | 211 Count | 666 Count | 137 Count | 0 VDC | 0 VDC |
| 1789364755 | 208 Count | 658 Count | 135 Count | 0 VDC | 0 VDC |
| 1789364455 | 206 Count | 656 Count | 134 Count | 0 VDC | 0 VDC |
| 1789364154 | 204 Count | 649 Count | 133 Count | 0 VDC | 0 VDC |
| 1789363854 | 201 Count | 640 Count | 131 Count | 0 VDC | 0 VDC |
| 1789363553 | 198 Count | 636 Count | 129 Count | 0 VDC | 0 VDC |
| 1789363252 | 195 Count | 626 Count | 127 Count | 0 VDC | 0 VDC |
| 1789362952 | 192 Count | 615 Count | 125 Count | 0 VDC | 0 VDC |
| 1789362651 | 190 Count | 613 Count | 124 Count | 0 VDC | 0 VDC |
| 1789362351 | 188 Count | 602 Count | 123 Count | 0 VDC | 0 VDC |
| 1789362050 | 185 Count | 591 Count | 121 Count | 0 VDC | 0 VDC |
| 1789361749 | 182 Count | 583 Count | 119 Count | 0 VDC | 0 VDC |
| 1789361449 | 179 Count | 571 Count | 117 Count | 0 VDC | 0 VDC |
| 1789361148 | 176 Count | 558 Count | 115 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)