This is the latest recevied telemetry packets stored in our database for station/object SP2UUU-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792556903 | 838 Count | 949 Count | 838 Count | 4.17 VDC | 0.18 VDC |
| 1792555103 | 834 Count | 940 Count | 834 Count | 4.19 VDC | 0.18 VDC |
| 1792553303 | 832 Count | 937 Count | 832 Count | 4.19 VDC | 0.2 VDC |
| 1792551503 | 829 Count | 934 Count | 829 Count | 4.18 VDC | 0.18 VDC |
| 1792549703 | 826 Count | 931 Count | 826 Count | 4.19 VDC | 0.14 VDC |
| 1792547903 | 824 Count | 929 Count | 824 Count | 4.18 VDC | 0.18 VDC |
| 1792546103 | 821 Count | 926 Count | 821 Count | 4.2 VDC | 0.2 VDC |
| 1792544303 | 819 Count | 924 Count | 819 Count | 4.2 VDC | 0.2 VDC |
| 1792542502 | 817 Count | 922 Count | 817 Count | 4.21 VDC | 0.18 VDC |
| 1792540702 | 814 Count | 919 Count | 814 Count | 4.2 VDC | 0.18 VDC |
| 1792538902 | 808 Count | 913 Count | 808 Count | 4.16 VDC | 0.18 VDC |
| 1792537102 | 806 Count | 911 Count | 806 Count | 4.17 VDC | 0.18 VDC |
| 1792535303 | 804 Count | 909 Count | 804 Count | 4.2 VDC | 0.2 VDC |
| 1792533503 | 802 Count | 907 Count | 802 Count | 4.2 VDC | 0.2 VDC |
| 1792531703 | 800 Count | 904 Count | 800 Count | 4.2 VDC | 0.2 VDC |
| 1792529903 | 797 Count | 901 Count | 797 Count | 4.19 VDC | 0.18 VDC |
| 1792528102 | 794 Count | 898 Count | 794 Count | 4.18 VDC | 0.18 VDC |
| 1792526302 | 791 Count | 895 Count | 791 Count | 4.17 VDC | 0.18 VDC |
| 1792524502 | 789 Count | 893 Count | 789 Count | 4.2 VDC | 0.18 VDC |
| 1792522702 | 787 Count | 891 Count | 787 Count | 4.19 VDC | 0.2 VDC |
| 1792520902 | 785 Count | 889 Count | 785 Count | 4.19 VDC | 0.18 VDC |
| 1792519102 | 779 Count | 883 Count | 779 Count | 4.16 VDC | 0.2 VDC |
| 1792517301 | 773 Count | 877 Count | 773 Count | 4.19 VDC | 0.18 VDC |
| 1792515501 | 769 Count | 873 Count | 769 Count | 4.19 VDC | 0.18 VDC |
| 1792513702 | 765 Count | 869 Count | 765 Count | 4.2 VDC | 0.18 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)