This is the latest recevied telemetry packets stored in our database for station/object SP2UUU-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791038406 | 394 Count | 479 Count | 394 Count | 4.2 VDC | 0.18 VDC |
| 1791036608 | 393 Count | 478 Count | 393 Count | 4.21 VDC | 0.18 VDC |
| 1791034808 | 391 Count | 476 Count | 391 Count | 4.18 VDC | 0.2 VDC |
| 1791033008 | 387 Count | 472 Count | 387 Count | 4.19 VDC | 0.18 VDC |
| 1791031208 | 381 Count | 466 Count | 381 Count | 4.19 VDC | 0.2 VDC |
| 1791029408 | 379 Count | 464 Count | 379 Count | 4.16 VDC | 0.18 VDC |
| 1791027608 | 372 Count | 457 Count | 372 Count | 4.2 VDC | 0.2 VDC |
| 1791025807 | 370 Count | 455 Count | 370 Count | 4.18 VDC | 0.18 VDC |
| 1791024007 | 368 Count | 453 Count | 368 Count | 4.2 VDC | 0.18 VDC |
| 1791022207 | 366 Count | 451 Count | 366 Count | 4.19 VDC | 0.18 VDC |
| 1791020406 | 363 Count | 447 Count | 363 Count | 4.16 VDC | 0.18 VDC |
| 1791018606 | 352 Count | 436 Count | 352 Count | 4.21 VDC | 0.18 VDC |
| 1791016806 | 345 Count | 428 Count | 345 Count | 4.17 VDC | 0.18 VDC |
| 1791015006 | 341 Count | 423 Count | 341 Count | 4.17 VDC | 0.2 VDC |
| 1791013206 | 337 Count | 417 Count | 337 Count | 4.19 VDC | 0.18 VDC |
| 1791011405 | 330 Count | 408 Count | 330 Count | 4.2 VDC | 0.2 VDC |
| 1791009605 | 328 Count | 406 Count | 328 Count | 4.17 VDC | 0.2 VDC |
| 1791007805 | 326 Count | 404 Count | 326 Count | 4.16 VDC | 0.18 VDC |
| 1791006005 | 321 Count | 399 Count | 321 Count | 4.17 VDC | 0.16 VDC |
| 1791004205 | 319 Count | 397 Count | 319 Count | 4.17 VDC | 0.18 VDC |
| 1791002405 | 317 Count | 393 Count | 317 Count | 4.18 VDC | 0.16 VDC |
| 1791000605 | 315 Count | 390 Count | 315 Count | 4.17 VDC | 0.18 VDC |
| 1790998804 | 313 Count | 388 Count | 313 Count | 4.18 VDC | 0.16 VDC |
| 1790997004 | 311 Count | 386 Count | 311 Count | 4.17 VDC | 0.18 VDC |
| 1790995204 | 309 Count | 384 Count | 309 Count | 4.17 VDC | 0.18 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)