This is the latest recevied telemetry packets stored in our database for station/object SP2UUU-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783632991 | 461 Count | 489 Count | 461 Count | 4.17 VDC | 0.18 VDC |
| 1783631191 | 459 Count | 487 Count | 459 Count | 4.2 VDC | 0.18 VDC |
| 1783629391 | 457 Count | 485 Count | 457 Count | 4.21 VDC | 0.18 VDC |
| 1783627592 | 455 Count | 483 Count | 455 Count | 4.18 VDC | 0.18 VDC |
| 1783625792 | 427 Count | 455 Count | 427 Count | 4.18 VDC | 0.18 VDC |
| 1783623992 | 419 Count | 447 Count | 419 Count | 4.2 VDC | 0.16 VDC |
| 1783622191 | 404 Count | 432 Count | 404 Count | 4.2 VDC | 0.18 VDC |
| 1783620391 | 372 Count | 400 Count | 372 Count | 4.19 VDC | 0.18 VDC |
| 1783618591 | 358 Count | 386 Count | 358 Count | 4.21 VDC | 0.18 VDC |
| 1783616791 | 350 Count | 378 Count | 350 Count | 4.18 VDC | 0.18 VDC |
| 1783614991 | 337 Count | 365 Count | 337 Count | 4.19 VDC | 0.2 VDC |
| 1783613191 | 320 Count | 348 Count | 320 Count | 4.17 VDC | 0.18 VDC |
| 1783611391 | 277 Count | 299 Count | 277 Count | 4.17 VDC | 0.18 VDC |
| 1783609591 | 222 Count | 238 Count | 222 Count | 4.19 VDC | 0.18 VDC |
| 1783607790 | 195 Count | 208 Count | 195 Count | 4.2 VDC | 0.18 VDC |
| 1783605996 | 181 Count | 194 Count | 181 Count | 4.17 VDC | 0.16 VDC |
| 1783604196 | 177 Count | 189 Count | 177 Count | 4.21 VDC | 0.16 VDC |
| 1783602396 | 157 Count | 165 Count | 157 Count | 4.19 VDC | 0.16 VDC |
| 1783600596 | 151 Count | 159 Count | 151 Count | 4.18 VDC | 0.16 VDC |
| 1783598796 | 149 Count | 156 Count | 149 Count | 4.17 VDC | 0.16 VDC |
| 1783596995 | 147 Count | 154 Count | 147 Count | 4.19 VDC | 0.18 VDC |
| 1783595195 | 146 Count | 153 Count | 146 Count | 4.19 VDC | 0.18 VDC |
| 1783593395 | 146 Count | 153 Count | 146 Count | 4.2 VDC | 0.18 VDC |
| 1783591595 | 146 Count | 153 Count | 146 Count | 4.18 VDC | 0.18 VDC |
| 1783589795 | 146 Count | 153 Count | 146 Count | 4.17 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)