This is the latest recevied telemetry packets stored in our database for station/object SR9BBC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791541355 | 28 Count | 630 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1791540454 | 27 Count | 537 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1791539553 | 24 Count | 491 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1791538653 | 23 Count | 454 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1791537752 | 19 Count | 412 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1791536851 | 18 Count | 372 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1791535950 | 14 Count | 334 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1791535049 | 13 Count | 288 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1791534148 | 9 Count | 243 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1791533248 | 8 Count | 196 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1791532347 | 4 Count | 136 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1791531446 | 3 Count | 52 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1791530545 | 48 Count | 1038 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1791529644 | 47 Count | 973 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1791528832 | 44 Count | 895 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1791527931 | 43 Count | 847 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1791527030 | 39 Count | 804 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1791526129 | 38 Count | 759 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1791525228 | 33 Count | 709 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1791524328 | 29 Count | 666 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1791523427 | 26 Count | 627 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1791522526 | 25 Count | 578 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1791521625 | 21 Count | 517 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1791520724 | 20 Count | 466 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1791519823 | 16 Count | 406 Count | 0 Count | 4.12 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)