This is the latest recevied telemetry packets stored in our database for station/object SP4WSL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792533094 | 276 Count | 287 Count | 248 Count | 0 VDC | 0 VDC |
| 1792531293 | 255 Count | 263 Count | 228 Count | 0 VDC | 0 VDC |
| 1792529493 | 233 Count | 239 Count | 207 Count | 0 VDC | 0 VDC |
| 1792527692 | 213 Count | 216 Count | 188 Count | 0 VDC | 0 VDC |
| 1792525891 | 192 Count | 189 Count | 168 Count | 0 VDC | 0 VDC |
| 1792525515 | 191 Count | 189 Count | 168 Count | 0 VDC | 0 VDC |
| 1792524288 | 190 Count | 189 Count | 168 Count | 0 VDC | 0 VDC |
| 1792522494 | 184 Count | 184 Count | 163 Count | 0 VDC | 0 VDC |
| 1792520693 | 178 Count | 179 Count | 158 Count | 0 VDC | 0 VDC |
| 1792518893 | 173 Count | 174 Count | 154 Count | 0 VDC | 0 VDC |
| 1792517092 | 171 Count | 171 Count | 153 Count | 0 VDC | 0 VDC |
| 1792515291 | 165 Count | 165 Count | 148 Count | 0 VDC | 0 VDC |
| 1792513491 | 159 Count | 160 Count | 143 Count | 0 VDC | 0 VDC |
| 1792511690 | 153 Count | 153 Count | 138 Count | 0 VDC | 0 VDC |
| 1792509889 | 147 Count | 147 Count | 133 Count | 0 VDC | 0 VDC |
| 1792508089 | 142 Count | 143 Count | 129 Count | 0 VDC | 0 VDC |
| 1792506288 | 130 Count | 132 Count | 118 Count | 0 VDC | 0 VDC |
| 1792504487 | 122 Count | 124 Count | 111 Count | 0 VDC | 0 VDC |
| 1792502687 | 114 Count | 116 Count | 104 Count | 0 VDC | 0 VDC |
| 1792500895 | 106 Count | 108 Count | 97 Count | 0 VDC | 0 VDC |
| 1792499095 | 98 Count | 99 Count | 90 Count | 0 VDC | 0 VDC |
| 1792497294 | 77 Count | 77 Count | 70 Count | 0 VDC | 0 VDC |
| 1792495493 | 67 Count | 68 Count | 61 Count | 0 VDC | 0 VDC |
| 1792493693 | 57 Count | 58 Count | 52 Count | 0 VDC | 0 VDC |
| 1792491892 | 47 Count | 49 Count | 43 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)