This is the latest recevied telemetry packets stored in our database for station/object SP4WSL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791532154 | 780 Count | 1015 Count | 742 Count | 0 VDC | 0 VDC |
| 1791530353 | 760 Count | 987 Count | 723 Count | 0 VDC | 0 VDC |
| 1791528552 | 739 Count | 958 Count | 703 Count | 0 VDC | 0 VDC |
| 1791526752 | 719 Count | 931 Count | 684 Count | 0 VDC | 0 VDC |
| 1791524951 | 685 Count | 880 Count | 651 Count | 0 VDC | 0 VDC |
| 1791523150 | 664 Count | 853 Count | 631 Count | 0 VDC | 0 VDC |
| 1791521350 | 645 Count | 828 Count | 613 Count | 0 VDC | 0 VDC |
| 1791521342 | 645 Count | 828 Count | 613 Count | 0 VDC | 0 VDC |
| 1791521334 | 645 Count | 828 Count | 613 Count | 0 VDC | 0 VDC |
| 1791495364 | 644 Count | 828 Count | 613 Count | 0 VDC | 0 VDC |
| 1791493563 | 623 Count | 802 Count | 593 Count | 0 VDC | 0 VDC |
| 1791491763 | 601 Count | 774 Count | 572 Count | 0 VDC | 0 VDC |
| 1791489962 | 580 Count | 748 Count | 552 Count | 0 VDC | 0 VDC |
| 1791488161 | 559 Count | 722 Count | 532 Count | 0 VDC | 0 VDC |
| 1791486361 | 538 Count | 696 Count | 512 Count | 0 VDC | 0 VDC |
| 1791484570 | 518 Count | 671 Count | 493 Count | 0 VDC | 0 VDC |
| 1791482769 | 468 Count | 601 Count | 444 Count | 0 VDC | 0 VDC |
| 1791480969 | 442 Count | 572 Count | 419 Count | 0 VDC | 0 VDC |
| 1791479167 | 422 Count | 549 Count | 400 Count | 0 VDC | 0 VDC |
| 1791477367 | 397 Count | 519 Count | 376 Count | 0 VDC | 0 VDC |
| 1791475566 | 376 Count | 491 Count | 356 Count | 0 VDC | 0 VDC |
| 1791473765 | 357 Count | 468 Count | 338 Count | 0 VDC | 0 VDC |
| 1791471965 | 336 Count | 444 Count | 318 Count | 0 VDC | 0 VDC |
| 1791470164 | 316 Count | 419 Count | 299 Count | 0 VDC | 0 VDC |
| 1791468363 | 283 Count | 379 Count | 267 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)