This is the latest recevied telemetry packets stored in our database for station/object SQ4VW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788099834 | 182 Count | 380 Count | 71 Count | 0 VDC | 0 VDC |
| 1788099534 | 181 Count | 378 Count | 71 Count | 0 VDC | 0 VDC |
| 1788099233 | 177 Count | 371 Count | 69 Count | 0 VDC | 0 VDC |
| 1788098932 | 176 Count | 370 Count | 69 Count | 0 VDC | 0 VDC |
| 1788098632 | 174 Count | 367 Count | 69 Count | 0 VDC | 0 VDC |
| 1788098383 | 171 Count | 362 Count | 67 Count | 0 VDC | 0 VDC |
| 1788098083 | 169 Count | 360 Count | 67 Count | 0 VDC | 0 VDC |
| 1788097782 | 168 Count | 358 Count | 67 Count | 0 VDC | 0 VDC |
| 1788097481 | 164 Count | 352 Count | 65 Count | 0 VDC | 0 VDC |
| 1788097180 | 163 Count | 351 Count | 65 Count | 0 VDC | 0 VDC |
| 1788096879 | 161 Count | 348 Count | 65 Count | 0 VDC | 0 VDC |
| 1788096579 | 158 Count | 343 Count | 63 Count | 0 VDC | 0 VDC |
| 1788096278 | 156 Count | 340 Count | 63 Count | 0 VDC | 0 VDC |
| 1788095977 | 155 Count | 338 Count | 63 Count | 0 VDC | 0 VDC |
| 1788095676 | 150 Count | 326 Count | 60 Count | 0 VDC | 0 VDC |
| 1788095376 | 147 Count | 312 Count | 58 Count | 0 VDC | 0 VDC |
| 1788095075 | 145 Count | 304 Count | 58 Count | 0 VDC | 0 VDC |
| 1788094774 | 142 Count | 297 Count | 56 Count | 0 VDC | 0 VDC |
| 1788094474 | 140 Count | 295 Count | 56 Count | 0 VDC | 0 VDC |
| 1788094173 | 139 Count | 293 Count | 56 Count | 0 VDC | 0 VDC |
| 1788093872 | 135 Count | 288 Count | 54 Count | 0 VDC | 0 VDC |
| 1788093571 | 134 Count | 287 Count | 54 Count | 0 VDC | 0 VDC |
| 1788093271 | 132 Count | 284 Count | 54 Count | 0 VDC | 0 VDC |
| 1788092971 | 129 Count | 280 Count | 52 Count | 0 VDC | 0 VDC |
| 1788092669 | 127 Count | 277 Count | 52 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)