This is the latest recevied telemetry packets stored in our database for station/object SQ4VW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785064412 | 219 Count | 690 Count | 100 Count | 0 VDC | 0 VDC |
| 1785064111 | 213 Count | 680 Count | 95 Count | 0 VDC | 0 VDC |
| 1785063810 | 205 Count | 671 Count | 89 Count | 0 VDC | 0 VDC |
| 1785063509 | 203 Count | 666 Count | 88 Count | 0 VDC | 0 VDC |
| 1785063209 | 201 Count | 663 Count | 88 Count | 0 VDC | 0 VDC |
| 1785062908 | 199 Count | 659 Count | 87 Count | 0 VDC | 0 VDC |
| 1785062606 | 196 Count | 656 Count | 86 Count | 0 VDC | 0 VDC |
| 1785062305 | 195 Count | 652 Count | 86 Count | 0 VDC | 0 VDC |
| 1785062005 | 192 Count | 649 Count | 85 Count | 0 VDC | 0 VDC |
| 1785061704 | 190 Count | 645 Count | 84 Count | 0 VDC | 0 VDC |
| 1785061404 | 188 Count | 643 Count | 84 Count | 0 VDC | 0 VDC |
| 1785061103 | 186 Count | 639 Count | 83 Count | 0 VDC | 0 VDC |
| 1785060802 | 183 Count | 637 Count | 82 Count | 0 VDC | 0 VDC |
| 1785060501 | 182 Count | 633 Count | 82 Count | 0 VDC | 0 VDC |
| 1785060200 | 179 Count | 630 Count | 81 Count | 0 VDC | 0 VDC |
| 1785059900 | 177 Count | 626 Count | 80 Count | 0 VDC | 0 VDC |
| 1785059599 | 175 Count | 623 Count | 80 Count | 0 VDC | 0 VDC |
| 1785059298 | 173 Count | 619 Count | 79 Count | 0 VDC | 0 VDC |
| 1785058997 | 170 Count | 616 Count | 78 Count | 0 VDC | 0 VDC |
| 1785058697 | 169 Count | 612 Count | 78 Count | 0 VDC | 0 VDC |
| 1785058396 | 166 Count | 609 Count | 77 Count | 0 VDC | 0 VDC |
| 1785058095 | 164 Count | 605 Count | 76 Count | 0 VDC | 0 VDC |
| 1785057795 | 162 Count | 602 Count | 76 Count | 0 VDC | 0 VDC |
| 1785057494 | 160 Count | 598 Count | 75 Count | 0 VDC | 0 VDC |
| 1785057193 | 157 Count | 595 Count | 74 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)