This is the latest recevied telemetry packets stored in our database for station/object SV1SSF-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782052319 | 460 Count | 971 Count | 441 Count | 0 VDC | 0 VDC |
| 1782050514 | 435 Count | 918 Count | 417 Count | 0 VDC | 0 VDC |
| 1782048708 | 413 Count | 874 Count | 396 Count | 0 VDC | 0 VDC |
| 1782046903 | 391 Count | 825 Count | 375 Count | 0 VDC | 0 VDC |
| 1782045097 | 368 Count | 788 Count | 353 Count | 0 VDC | 0 VDC |
| 1782043292 | 349 Count | 736 Count | 335 Count | 0 VDC | 0 VDC |
| 1782041487 | 324 Count | 620 Count | 311 Count | 0 VDC | 0 VDC |
| 1782039681 | 301 Count | 528 Count | 289 Count | 0 VDC | 0 VDC |
| 1782037876 | 281 Count | 496 Count | 270 Count | 0 VDC | 0 VDC |
| 1782036070 | 257 Count | 456 Count | 247 Count | 0 VDC | 0 VDC |
| 1782034265 | 236 Count | 425 Count | 227 Count | 0 VDC | 0 VDC |
| 1782032459 | 211 Count | 381 Count | 203 Count | 0 VDC | 0 VDC |
| 1782030654 | 188 Count | 340 Count | 181 Count | 0 VDC | 0 VDC |
| 1782028849 | 160 Count | 290 Count | 154 Count | 0 VDC | 0 VDC |
| 1782027043 | 135 Count | 250 Count | 130 Count | 0 VDC | 0 VDC |
| 1782025238 | 109 Count | 204 Count | 105 Count | 0 VDC | 0 VDC |
| 1782023432 | 88 Count | 162 Count | 85 Count | 0 VDC | 0 VDC |
| 1782021627 | 63 Count | 115 Count | 61 Count | 0 VDC | 0 VDC |
| 1782019822 | 36 Count | 63 Count | 35 Count | 0 VDC | 0 VDC |
| 1782018382 | 20 Count | 34 Count | 20 Count | 0 VDC | 0 VDC |
| 1782016577 | 500 Count | 1005 Count | 481 Count | 0 VDC | 0 VDC |
| 1782014771 | 473 Count | 954 Count | 455 Count | 0 VDC | 0 VDC |
| 1782012966 | 452 Count | 915 Count | 435 Count | 0 VDC | 0 VDC |
| 1782011161 | 430 Count | 874 Count | 414 Count | 0 VDC | 0 VDC |
| 1782009355 | 408 Count | 825 Count | 393 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)