This is the latest recevied telemetry packets stored in our database for station/object SV1SSF-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785282275 | 232 Count | 506 Count | 220 Count | 0 VDC | 0 VDC |
| 1785280470 | 215 Count | 465 Count | 204 Count | 0 VDC | 0 VDC |
| 1785278664 | 197 Count | 423 Count | 187 Count | 0 VDC | 0 VDC |
| 1785276859 | 180 Count | 384 Count | 171 Count | 0 VDC | 0 VDC |
| 1785275053 | 164 Count | 356 Count | 156 Count | 0 VDC | 0 VDC |
| 1785273248 | 145 Count | 314 Count | 138 Count | 0 VDC | 0 VDC |
| 1785271443 | 130 Count | 281 Count | 124 Count | 0 VDC | 0 VDC |
| 1785269637 | 113 Count | 249 Count | 108 Count | 0 VDC | 0 VDC |
| 1785267830 | 96 Count | 214 Count | 92 Count | 0 VDC | 0 VDC |
| 1785266024 | 82 Count | 184 Count | 79 Count | 0 VDC | 0 VDC |
| 1785264219 | 63 Count | 139 Count | 61 Count | 0 VDC | 0 VDC |
| 1785262413 | 42 Count | 91 Count | 41 Count | 0 VDC | 0 VDC |
| 1785260608 | 24 Count | 54 Count | 24 Count | 0 VDC | 0 VDC |
| 1785258802 | 475 Count | 1029 Count | 453 Count | 0 VDC | 0 VDC |
| 1785256997 | 449 Count | 978 Count | 428 Count | 0 VDC | 0 VDC |
| 1785255192 | 427 Count | 934 Count | 407 Count | 0 VDC | 0 VDC |
| 1785253386 | 397 Count | 877 Count | 378 Count | 0 VDC | 0 VDC |
| 1785251860 | 381 Count | 846 Count | 363 Count | 0 VDC | 0 VDC |
| 1785250054 | 361 Count | 806 Count | 344 Count | 0 VDC | 0 VDC |
| 1785248249 | 341 Count | 762 Count | 325 Count | 0 VDC | 0 VDC |
| 1785246444 | 318 Count | 712 Count | 303 Count | 0 VDC | 0 VDC |
| 1785244638 | 299 Count | 667 Count | 285 Count | 0 VDC | 0 VDC |
| 1785242833 | 271 Count | 609 Count | 258 Count | 0 VDC | 0 VDC |
| 1785241027 | 253 Count | 564 Count | 241 Count | 0 VDC | 0 VDC |
| 1785239222 | 230 Count | 518 Count | 219 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)