This is the latest recevied telemetry packets stored in our database for station/object SR2JP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792528838 | 222 Count | 935 Count | 6 Count | 0 VDC | 0 VDC |
| 1792527157 | 215 Count | 896 Count | 6 Count | 0 VDC | 0 VDC |
| 1792525476 | 208 Count | 861 Count | 6 Count | 0 VDC | 0 VDC |
| 1792523796 | 198 Count | 830 Count | 5 Count | 0 VDC | 0 VDC |
| 1792522115 | 192 Count | 800 Count | 5 Count | 0 VDC | 0 VDC |
| 1792520434 | 176 Count | 769 Count | 4 Count | 0 VDC | 0 VDC |
| 1792518753 | 160 Count | 735 Count | 3 Count | 0 VDC | 0 VDC |
| 1792517073 | 154 Count | 701 Count | 3 Count | 0 VDC | 0 VDC |
| 1792515391 | 147 Count | 667 Count | 3 Count | 0 VDC | 0 VDC |
| 1792513710 | 139 Count | 631 Count | 3 Count | 0 VDC | 0 VDC |
| 1792512029 | 127 Count | 585 Count | 3 Count | 0 VDC | 0 VDC |
| 1792508916 | 111 Count | 515 Count | 3 Count | 0 VDC | 0 VDC |
| 1792507236 | 99 Count | 465 Count | 0 Count | 0 VDC | 0 VDC |
| 1792505555 | 91 Count | 425 Count | 0 Count | 0 VDC | 0 VDC |
| 1792503874 | 86 Count | 387 Count | 0 Count | 0 VDC | 0 VDC |
| 1792502193 | 79 Count | 358 Count | 0 Count | 0 VDC | 0 VDC |
| 1792500513 | 72 Count | 335 Count | 0 Count | 0 VDC | 0 VDC |
| 1792498832 | 66 Count | 312 Count | 0 Count | 0 VDC | 0 VDC |
| 1792497151 | 59 Count | 282 Count | 0 Count | 0 VDC | 0 VDC |
| 1792495470 | 52 Count | 246 Count | 0 Count | 0 VDC | 0 VDC |
| 1792493789 | 45 Count | 224 Count | 0 Count | 0 VDC | 0 VDC |
| 1792492109 | 40 Count | 184 Count | 0 Count | 0 VDC | 0 VDC |
| 1792490428 | 33 Count | 139 Count | 0 Count | 0 VDC | 0 VDC |
| 1792487316 | 18 Count | 71 Count | 0 Count | 0 VDC | 0 VDC |
| 1792485635 | 11 Count | 44 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)