This is the latest recevied telemetry packets stored in our database for station/object SR2JP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789357271 | 29 Count | 28 Count | 0 Count | 0 VDC | 0 VDC |
| 1789355590 | 24 Count | 24 Count | 0 Count | 0 VDC | 0 VDC |
| 1789353909 | 19 Count | 20 Count | 0 Count | 0 VDC | 0 VDC |
| 1789352228 | 16 Count | 11 Count | 0 Count | 0 VDC | 0 VDC |
| 1789350548 | 10 Count | 7 Count | 0 Count | 0 VDC | 0 VDC |
| 1789348867 | 5 Count | 3 Count | 0 Count | 0 VDC | 0 VDC |
| 1789347186 | 1002 Count | 620 Count | 183 Count | 0 VDC | 0 VDC |
| 1789345505 | 997 Count | 617 Count | 183 Count | 0 VDC | 0 VDC |
| 1789343824 | 992 Count | 613 Count | 183 Count | 0 VDC | 0 VDC |
| 1789342144 | 986 Count | 609 Count | 183 Count | 0 VDC | 0 VDC |
| 1789340463 | 981 Count | 604 Count | 183 Count | 0 VDC | 0 VDC |
| 1789339041 | 973 Count | 601 Count | 183 Count | 0 VDC | 0 VDC |
| 1789337361 | 967 Count | 598 Count | 183 Count | 0 VDC | 0 VDC |
| 1789335680 | 963 Count | 595 Count | 183 Count | 0 VDC | 0 VDC |
| 1789333999 | 957 Count | 591 Count | 183 Count | 0 VDC | 0 VDC |
| 1789332309 | 954 Count | 587 Count | 183 Count | 0 VDC | 0 VDC |
| 1789330628 | 953 Count | 578 Count | 183 Count | 0 VDC | 0 VDC |
| 1789328948 | 947 Count | 574 Count | 183 Count | 0 VDC | 0 VDC |
| 1789327267 | 942 Count | 570 Count | 183 Count | 0 VDC | 0 VDC |
| 1789325586 | 936 Count | 567 Count | 183 Count | 0 VDC | 0 VDC |
| 1789323905 | 929 Count | 563 Count | 183 Count | 0 VDC | 0 VDC |
| 1789322225 | 923 Count | 559 Count | 183 Count | 0 VDC | 0 VDC |
| 1789320543 | 918 Count | 555 Count | 183 Count | 0 VDC | 0 VDC |
| 1789318863 | 912 Count | 549 Count | 183 Count | 0 VDC | 0 VDC |
| 1789317430 | 904 Count | 546 Count | 183 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)