This is the latest recevied telemetry packets stored in our database for station/object SQ3MQD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779671075 | 131 Count | 638 Count | 0 Count | 0 VDC | 0 VDC |
| 1779670172 | 130 Count | 636 Count | 0 Count | 0 VDC | 0 VDC |
| 1779669269 | 129 Count | 633 Count | 0 Count | 0 VDC | 0 VDC |
| 1779668365 | 128 Count | 629 Count | 0 Count | 0 VDC | 0 VDC |
| 1779667462 | 127 Count | 625 Count | 0 Count | 0 VDC | 0 VDC |
| 1779666559 | 126 Count | 621 Count | 0 Count | 0 VDC | 0 VDC |
| 1779665656 | 125 Count | 616 Count | 0 Count | 0 VDC | 0 VDC |
| 1779664753 | 124 Count | 612 Count | 0 Count | 0 VDC | 0 VDC |
| 1779663850 | 123 Count | 608 Count | 0 Count | 0 VDC | 0 VDC |
| 1779662946 | 122 Count | 603 Count | 0 Count | 0 VDC | 0 VDC |
| 1779662043 | 121 Count | 598 Count | 0 Count | 0 VDC | 0 VDC |
| 1779661140 | 120 Count | 592 Count | 0 Count | 0 VDC | 0 VDC |
| 1779660237 | 119 Count | 589 Count | 0 Count | 0 VDC | 0 VDC |
| 1779659333 | 118 Count | 586 Count | 0 Count | 0 VDC | 0 VDC |
| 1779658430 | 117 Count | 584 Count | 0 Count | 0 VDC | 0 VDC |
| 1779657605 | 116 Count | 582 Count | 0 Count | 0 VDC | 0 VDC |
| 1779656702 | 115 Count | 580 Count | 0 Count | 0 VDC | 0 VDC |
| 1779655798 | 114 Count | 578 Count | 0 Count | 0 VDC | 0 VDC |
| 1779654895 | 113 Count | 577 Count | 0 Count | 0 VDC | 0 VDC |
| 1779653992 | 112 Count | 572 Count | 0 Count | 0 VDC | 0 VDC |
| 1779653089 | 111 Count | 570 Count | 0 Count | 0 VDC | 0 VDC |
| 1779652185 | 110 Count | 568 Count | 0 Count | 0 VDC | 0 VDC |
| 1779651282 | 109 Count | 562 Count | 0 Count | 0 VDC | 0 VDC |
| 1779650378 | 108 Count | 556 Count | 0 Count | 0 VDC | 0 VDC |
| 1779649475 | 107 Count | 554 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)