This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782088933 | 7 Count | 35 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782088633 | 6 Count | 30 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782088333 | 5 Count | 27 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782088033 | 4 Count | 22 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782087732 | 3 Count | 17 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782087433 | 2 Count | 15 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782087133 | 1 Count | 9 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782086834 | 0 Count | 4 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782086533 | 290 Count | 1003 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782086233 | 289 Count | 1000 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782085934 | 288 Count | 996 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782085633 | 287 Count | 992 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782085334 | 286 Count | 986 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782085034 | 285 Count | 982 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782084734 | 284 Count | 979 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782084434 | 283 Count | 974 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782084134 | 282 Count | 970 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782083834 | 281 Count | 965 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782083534 | 280 Count | 961 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1782083234 | 279 Count | 957 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1782082934 | 278 Count | 955 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1782082634 | 277 Count | 951 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1782082035 | 275 Count | 942 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1782081734 | 274 Count | 937 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1782081134 | 272 Count | 935 Count | 0 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)