This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794944263 | 205 Count | 991 Count | 0 Count | 3.17 VDC | 0 VDC |
| 1794943963 | 204 Count | 984 Count | 0 Count | 3.17 VDC | 0 VDC |
| 1794943663 | 203 Count | 980 Count | 0 Count | 3.18 VDC | 0 VDC |
| 1794943364 | 202 Count | 972 Count | 0 Count | 3.18 VDC | 0 VDC |
| 1794943063 | 201 Count | 966 Count | 0 Count | 3.18 VDC | 0 VDC |
| 1794942764 | 200 Count | 960 Count | 0 Count | 3.18 VDC | 0 VDC |
| 1794942464 | 199 Count | 956 Count | 0 Count | 3.18 VDC | 0 VDC |
| 1794942164 | 198 Count | 949 Count | 0 Count | 3.19 VDC | 0 VDC |
| 1794941864 | 197 Count | 946 Count | 0 Count | 3.19 VDC | 0 VDC |
| 1794941564 | 196 Count | 937 Count | 0 Count | 3.19 VDC | 0 VDC |
| 1794941264 | 195 Count | 931 Count | 0 Count | 3.19 VDC | 0 VDC |
| 1794940964 | 194 Count | 925 Count | 0 Count | 3.19 VDC | 0 VDC |
| 1794940665 | 193 Count | 919 Count | 0 Count | 3.19 VDC | 0 VDC |
| 1794940365 | 192 Count | 906 Count | 0 Count | 3.2 VDC | 0 VDC |
| 1794940065 | 191 Count | 902 Count | 0 Count | 3.2 VDC | 0 VDC |
| 1794939765 | 190 Count | 894 Count | 0 Count | 3.2 VDC | 0 VDC |
| 1794939465 | 189 Count | 879 Count | 0 Count | 3.21 VDC | 0 VDC |
| 1794939165 | 188 Count | 873 Count | 0 Count | 3.21 VDC | 0 VDC |
| 1794938865 | 187 Count | 855 Count | 0 Count | 3.21 VDC | 0 VDC |
| 1794938565 | 186 Count | 846 Count | 0 Count | 3.21 VDC | 0 VDC |
| 1794938265 | 185 Count | 842 Count | 0 Count | 3.21 VDC | 0 VDC |
| 1794937965 | 184 Count | 835 Count | 0 Count | 3.21 VDC | 0 VDC |
| 1794937665 | 183 Count | 829 Count | 0 Count | 3.21 VDC | 0 VDC |
| 1794937365 | 182 Count | 826 Count | 0 Count | 3.21 VDC | 0 VDC |
| 1794936766 | 180 Count | 814 Count | 0 Count | 3.22 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)