This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792533398 | 83 Count | 168 Count | 81 Count | 4.31 VDC | 0 VDC |
| 1792531598 | 57 Count | 114 Count | 56 Count | 4.31 VDC | 0 VDC |
| 1792529797 | 23 Count | 50 Count | 23 Count | 4.29 VDC | 0 VDC |
| 1792527996 | 498 Count | 1006 Count | 376 Count | 4.3 VDC | 0 VDC |
| 1792526195 | 471 Count | 950 Count | 350 Count | 4.31 VDC | 0 VDC |
| 1792524395 | 440 Count | 891 Count | 320 Count | 4.31 VDC | 0 VDC |
| 1792522594 | 407 Count | 831 Count | 288 Count | 4.31 VDC | 0 VDC |
| 1792520793 | 367 Count | 771 Count | 256 Count | 4.28 VDC | 0 VDC |
| 1792518992 | 338 Count | 705 Count | 234 Count | 4.3 VDC | 0 VDC |
| 1792517192 | 309 Count | 641 Count | 206 Count | 4.28 VDC | 0 VDC |
| 1792515398 | 280 Count | 551 Count | 182 Count | 4.31 VDC | 0 VDC |
| 1792513597 | 257 Count | 489 Count | 160 Count | 4.31 VDC | 0 VDC |
| 1792511797 | 214 Count | 400 Count | 118 Count | 4.29 VDC | 0 VDC |
| 1792509996 | 188 Count | 336 Count | 93 Count | 4.31 VDC | 0 VDC |
| 1792508195 | 140 Count | 242 Count | 71 Count | 4.3 VDC | 0 VDC |
| 1792506395 | 98 Count | 173 Count | 54 Count | 4.28 VDC | 0 VDC |
| 1792504594 | 61 Count | 89 Count | 38 Count | 4.28 VDC | 0 VDC |
| 1792502793 | 689 Count | 1047 Count | 403 Count | 4.28 VDC | 0 VDC |
| 1792500992 | 647 Count | 987 Count | 384 Count | 4.3 VDC | 0 VDC |
| 1792499192 | 600 Count | 908 Count | 356 Count | 4.27 VDC | 0 VDC |
| 1792497391 | 561 Count | 850 Count | 336 Count | 4.31 VDC | 0 VDC |
| 1792495590 | 508 Count | 777 Count | 299 Count | 4.3 VDC | 0 VDC |
| 1792472196 | 380 Count | 810 Count | 354 Count | 4.29 VDC | 0 VDC |
| 1792470395 | 364 Count | 773 Count | 339 Count | 4.29 VDC | 0 VDC |
| 1792468594 | 344 Count | 738 Count | 320 Count | 4.29 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)