This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791017971 | 280 Count | 678 Count | 250 Count | 4.29 VDC | 0 VDC |
| 1791016170 | 239 Count | 629 Count | 215 Count | 4.3 VDC | 0 VDC |
| 1791014369 | 217 Count | 593 Count | 199 Count | 4.29 VDC | 0 VDC |
| 1791012568 | 189 Count | 543 Count | 176 Count | 4.31 VDC | 0 VDC |
| 1791010768 | 170 Count | 487 Count | 159 Count | 4.29 VDC | 0 VDC |
| 1791008967 | 137 Count | 418 Count | 127 Count | 4.31 VDC | 0 VDC |
| 1791007166 | 113 Count | 345 Count | 104 Count | 4.3 VDC | 0 VDC |
| 1791005366 | 92 Count | 286 Count | 84 Count | 4.29 VDC | 0 VDC |
| 1791003565 | 74 Count | 219 Count | 67 Count | 4.29 VDC | 0 VDC |
| 1791001764 | 58 Count | 152 Count | 52 Count | 4.28 VDC | 0 VDC |
| 1790999964 | 32 Count | 80 Count | 27 Count | 4.29 VDC | 0 VDC |
| 1790998163 | 4 Count | 3 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1790974769 | 82 Count | 151 Count | 80 Count | 4.29 VDC | 0 VDC |
| 1790972968 | 44 Count | 81 Count | 43 Count | 4.29 VDC | 0 VDC |
| 1790971167 | 675 Count | 1053 Count | 635 Count | 4.29 VDC | 0 VDC |
| 1790969367 | 632 Count | 972 Count | 593 Count | 4.3 VDC | 0 VDC |
| 1790967566 | 587 Count | 890 Count | 550 Count | 4.31 VDC | 0 VDC |
| 1790965765 | 546 Count | 814 Count | 510 Count | 4.29 VDC | 0 VDC |
| 1790963965 | 505 Count | 744 Count | 471 Count | 4.28 VDC | 0 VDC |
| 1790962164 | 462 Count | 673 Count | 429 Count | 4.31 VDC | 0 VDC |
| 1790960363 | 408 Count | 593 Count | 377 Count | 4.29 VDC | 0 VDC |
| 1790958563 | 357 Count | 521 Count | 327 Count | 4.28 VDC | 0 VDC |
| 1790956762 | 323 Count | 455 Count | 295 Count | 4.29 VDC | 0 VDC |
| 1790954961 | 293 Count | 411 Count | 266 Count | 4.31 VDC | 0 VDC |
| 1790931564 | 362 Count | 1009 Count | 346 Count | 4.3 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)