This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789372674 | 505 Count | 874 Count | 481 Count | 4.29 VDC | 0 VDC |
| 1789370874 | 483 Count | 838 Count | 460 Count | 4.3 VDC | 0 VDC |
| 1789369073 | 421 Count | 747 Count | 400 Count | 4.29 VDC | 0 VDC |
| 1789367272 | 384 Count | 688 Count | 364 Count | 4.29 VDC | 0 VDC |
| 1789365472 | 357 Count | 648 Count | 338 Count | 4.29 VDC | 0 VDC |
| 1789363671 | 317 Count | 579 Count | 300 Count | 4.3 VDC | 0 VDC |
| 1789361870 | 286 Count | 523 Count | 270 Count | 4.3 VDC | 0 VDC |
| 1789360070 | 263 Count | 491 Count | 249 Count | 4.3 VDC | 0 VDC |
| 1789358269 | 248 Count | 465 Count | 235 Count | 4.28 VDC | 0 VDC |
| 1789356468 | 231 Count | 431 Count | 219 Count | 4.3 VDC | 0 VDC |
| 1789354675 | 213 Count | 398 Count | 206 Count | 4.31 VDC | 0 VDC |
| 1789352874 | 189 Count | 352 Count | 183 Count | 4.29 VDC | 0 VDC |
| 1789351074 | 168 Count | 308 Count | 163 Count | 4.3 VDC | 0 VDC |
| 1789349273 | 146 Count | 267 Count | 142 Count | 4.29 VDC | 0 VDC |
| 1789347472 | 124 Count | 227 Count | 121 Count | 4.3 VDC | 0 VDC |
| 1789345672 | 101 Count | 185 Count | 99 Count | 4.29 VDC | 0 VDC |
| 1789343871 | 79 Count | 144 Count | 78 Count | 4.3 VDC | 0 VDC |
| 1789342070 | 55 Count | 104 Count | 55 Count | 4.3 VDC | 0 VDC |
| 1789340269 | 599 Count | 1066 Count | 536 Count | 4.29 VDC | 0 VDC |
| 1789338469 | 556 Count | 982 Count | 494 Count | 4.29 VDC | 0 VDC |
| 1789336668 | 516 Count | 911 Count | 455 Count | 4.29 VDC | 0 VDC |
| 1789334867 | 499 Count | 880 Count | 439 Count | 4.29 VDC | 0 VDC |
| 1789333074 | 478 Count | 852 Count | 423 Count | 4.31 VDC | 0 VDC |
| 1789331273 | 458 Count | 818 Count | 404 Count | 4.3 VDC | 0 VDC |
| 1789329472 | 441 Count | 787 Count | 388 Count | 4.31 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)