This is the latest recevied telemetry packets stored in our database for station/object OK1FWG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792545786 | 567 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792543983 | 565 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792542180 | 563 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792540377 | 562 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792538573 | 560 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792536770 | 558 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792534967 | 557 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792533164 | 556 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792531361 | 555 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792529558 | 554 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792527755 | 553 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792525952 | 552 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792524148 | 551 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792522345 | 547 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792520542 | 546 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792518739 | 545 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792516936 | 543 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792515133 | 542 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792513330 | 541 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792511527 | 539 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1792509724 | 536 Count | 183 Count | 183 Count | 0 VDC | 0 VDC |
| 1792507921 | 533 Count | 182 Count | 182 Count | 0 VDC | 0 VDC |
| 1792506118 | 530 Count | 180 Count | 180 Count | 0 VDC | 0 VDC |
| 1792504315 | 529 Count | 180 Count | 180 Count | 0 VDC | 0 VDC |
| 1792502511 | 527 Count | 180 Count | 180 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)