This is the latest recevied telemetry packets stored in our database for station/object OK1FWG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766383903 | 281 Count | 132 Count | 128 Count | 0 VDC | 0 VDC |
| 1766382100 | 278 Count | 130 Count | 126 Count | 0 VDC | 0 VDC |
| 1766380296 | 272 Count | 125 Count | 121 Count | 0 VDC | 0 VDC |
| 1766378493 | 270 Count | 125 Count | 121 Count | 0 VDC | 0 VDC |
| 1766376690 | 269 Count | 125 Count | 121 Count | 0 VDC | 0 VDC |
| 1766374887 | 268 Count | 125 Count | 121 Count | 0 VDC | 0 VDC |
| 1766373084 | 267 Count | 125 Count | 121 Count | 0 VDC | 0 VDC |
| 1766371280 | 264 Count | 124 Count | 121 Count | 0 VDC | 0 VDC |
| 1766369477 | 262 Count | 123 Count | 120 Count | 0 VDC | 0 VDC |
| 1766367674 | 260 Count | 122 Count | 119 Count | 0 VDC | 0 VDC |
| 1766365871 | 259 Count | 122 Count | 119 Count | 0 VDC | 0 VDC |
| 1766364068 | 253 Count | 120 Count | 117 Count | 0 VDC | 0 VDC |
| 1766362264 | 247 Count | 118 Count | 115 Count | 0 VDC | 0 VDC |
| 1766360461 | 244 Count | 116 Count | 113 Count | 0 VDC | 0 VDC |
| 1766358658 | 242 Count | 115 Count | 112 Count | 0 VDC | 0 VDC |
| 1766356855 | 238 Count | 112 Count | 110 Count | 0 VDC | 0 VDC |
| 1766355051 | 237 Count | 112 Count | 110 Count | 0 VDC | 0 VDC |
| 1766353248 | 235 Count | 111 Count | 109 Count | 0 VDC | 0 VDC |
| 1766351445 | 232 Count | 109 Count | 107 Count | 0 VDC | 0 VDC |
| 1766349643 | 228 Count | 108 Count | 106 Count | 0 VDC | 0 VDC |
| 1766347839 | 226 Count | 106 Count | 105 Count | 0 VDC | 0 VDC |
| 1766346036 | 223 Count | 104 Count | 103 Count | 0 VDC | 0 VDC |
| 1766344233 | 222 Count | 104 Count | 103 Count | 0 VDC | 0 VDC |
| 1766342430 | 220 Count | 103 Count | 102 Count | 0 VDC | 0 VDC |
| 1766340627 | 219 Count | 103 Count | 102 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)