This is the latest recevied telemetry packets stored in our database for station/object SP9KKK-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765490399 | 58 Count | 794 Count | 0 Count | 0 VDC | 0 VDC |
| 1765489498 | 52 Count | 704 Count | 0 Count | 0 VDC | 0 VDC |
| 1765488597 | 42 Count | 550 Count | 0 Count | 0 VDC | 0 VDC |
| 1765487697 | 33 Count | 440 Count | 0 Count | 0 VDC | 0 VDC |
| 1765486796 | 18 Count | 321 Count | 0 Count | 0 VDC | 0 VDC |
| 1765485895 | 10 Count | 173 Count | 0 Count | 0 VDC | 0 VDC |
| 1765484994 | 96 Count | 1070 Count | 0 Count | 0 VDC | 0 VDC |
| 1765484093 | 93 Count | 984 Count | 0 Count | 0 VDC | 0 VDC |
| 1765483192 | 78 Count | 835 Count | 0 Count | 0 VDC | 0 VDC |
| 1765482291 | 70 Count | 745 Count | 0 Count | 0 VDC | 0 VDC |
| 1765481470 | 48 Count | 459 Count | 0 Count | 0 VDC | 0 VDC |
| 1765481391 | 62 Count | 601 Count | 0 Count | 0 VDC | 0 VDC |
| 1765480576 | 48 Count | 459 Count | 0 Count | 0 VDC | 0 VDC |
| 1765479674 | 39 Count | 359 Count | 0 Count | 0 VDC | 0 VDC |
| 1765478773 | 29 Count | 272 Count | 0 Count | 0 VDC | 0 VDC |
| 1765477873 | 14 Count | 133 Count | 0 Count | 0 VDC | 0 VDC |
| 1765476972 | 9 Count | 82 Count | 0 Count | 0 VDC | 0 VDC |
| 1765476071 | 83 Count | 1058 Count | 0 Count | 0 VDC | 0 VDC |
| 1765475170 | 67 Count | 870 Count | 0 Count | 0 VDC | 0 VDC |
| 1765474269 | 56 Count | 701 Count | 0 Count | 0 VDC | 0 VDC |
| 1765473368 | 46 Count | 628 Count | 0 Count | 0 VDC | 0 VDC |
| 1765472467 | 37 Count | 518 Count | 0 Count | 0 VDC | 0 VDC |
| 1765471566 | 30 Count | 364 Count | 0 Count | 0 VDC | 0 VDC |
| 1765470665 | 20 Count | 232 Count | 0 Count | 0 VDC | 0 VDC |
| 1765469764 | 12 Count | 109 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)