This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1792566035 | 4.06 V | 0 V | 100 mW | 29.7 degC | 100725 Pa |
| 1792564311 | 3.94 V | 0 V | 112 mW | 30.7 degC | 100725 Pa |
| 1792563712 | 4.07 V | 0 V | 92 mW | 27.4 degC | 100712.5 Pa |
| 1792562371 | 3.94 V | 0 V | 92 mW | 28.6 degC | 100700 Pa |
| 1792560564 | 3.94 V | 0 V | 92 mW | 28.2 degC | 100675 Pa |
| 1792560112 | 4.06 V | 0 V | 92 mW | 27.3 degC | 100675 Pa |
| 1792558773 | 3.96 V | 0 V | 94 mW | 28.4 degC | 100675 Pa |
| 1792556978 | 4.06 V | 0 V | 92 mW | 28.5 degC | 100700 Pa |
| 1792556512 | 3.94 V | 0 V | 92 mW | 27 degC | 100700 Pa |
| 1792555179 | 4.06 V | 0 V | 94 mW | 28.2 degC | 100700 Pa |
| 1792553368 | 4.07 V | 0 V | 94 mW | 27.7 degC | 100737.5 Pa |
| 1792552906 | 3.94 V | 0 V | 94 mW | 26.7 degC | 100750 Pa |
| 1792551616 | 3.95 V | 0 V | 96 mW | 28.3 degC | 100762.5 Pa |
| 1792549757 | 3.93 V | 0 V | 90 mW | 26.9 degC | 100800 Pa |
| 1792549312 | 4.06 V | 0 V | 102 mW | 26.2 degC | 100812.5 Pa |
| 1792547966 | 4.06 V | 0 V | 90 mW | 27 degC | 100825 Pa |
| 1792546324 | 3.93 V | 0 V | 112 mW | 29.7 degC | 100837.5 Pa |
| 1792545717 | 4.07 V | 0 V | 92 mW | 25.9 degC | 100837.5 Pa |
| 1792544388 | 3.94 V | 0 V | 96 mW | 27.4 degC | 100875 Pa |
| 1792542555 | 3.94 V | 0 V | 94 mW | 26.7 degC | 100912.5 Pa |
| 1792542114 | 3.96 V | 0 V | 124 mW | 26.2 degC | 100912.5 Pa |
| 1792541229 | 4.06 V | 0 V | 134 mW | 30.3 degC | 100925 Pa |
| 1792539029 | 3.94 V | 0 V | 122 mW | 28.4 degC | 100950 Pa |
| 1792538515 | 4.07 V | 0 V | 184 mW | 27.4 degC | 100950 Pa |
| 1792538352 | 4.07 V | 0 V | 196 mW | 30.6 degC | 100950 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)