This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1787092232 | 4 V | 0 V | 116 mW | 22.4 degC | 101850 Pa |
| 1787092080 | 4 V | 0 V | 114 mW | 21.3 degC | 101850 Pa |
| 1787090424 | 4 V | 0 V | 116 mW | 22.1 degC | 101850 Pa |
| 1787088607 | 4 V | 0 V | 114 mW | 21.6 degC | 101837.5 Pa |
| 1787088482 | 4 V | 0 V | 114 mW | 21.3 degC | 101837.5 Pa |
| 1787086803 | 4 V | 0 V | 116 mW | 21.6 degC | 101812.5 Pa |
| 1787085000 | 4 V | 0 V | 118 mW | 22 degC | 101775 Pa |
| 1787084878 | 4 V | 0 V | 126 mW | 21.8 degC | 101762.5 Pa |
| 1787083205 | 4 V | 0 V | 120 mW | 22 degC | 101737.5 Pa |
| 1787081403 | 4 V | 0 V | 336 mW | 26.4 degC | 101725 Pa |
| 1787081284 | 4 V | 0 V | 222 mW | 26.3 degC | 101725 Pa |
| 1787079638 | 4 V | 0 V | 122 mW | 23.1 degC | 101725 Pa |
| 1787077818 | 4 V | 0 V | 122 mW | 22.9 degC | 101725 Pa |
| 1787077685 | 4 V | 0 V | 120 mW | 22.4 degC | 101725 Pa |
| 1787076038 | 4 V | 0 V | 122 mW | 23.4 degC | 101737.5 Pa |
| 1787074205 | 4 V | 0 V | 112 mW | 22.6 degC | 101750 Pa |
| 1787074089 | 4 V | 0 V | 114 mW | 22.3 degC | 101737.5 Pa |
| 1787072410 | 4 V | 0 V | 114 mW | 22.7 degC | 101762.5 Pa |
| 1787070612 | 4 V | 0 V | 112 mW | 23.1 degC | 101800 Pa |
| 1787070487 | 4 V | 0 V | 118 mW | 22.7 degC | 101800 Pa |
| 1787068809 | 4 V | 0 V | 112 mW | 23.2 degC | 101812.5 Pa |
| 1787067007 | 4 V | 0 V | 338 mW | 27.9 degC | 101850 Pa |
| 1787066889 | 4 V | 0 V | 230 mW | 27.8 degC | 101850 Pa |
| 1787065215 | 4 V | 0 V | 122 mW | 24.2 degC | 101862.5 Pa |
| 1787063501 | 4 V | 0 V | 128 mW | 26.6 degC | 101887.5 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)