This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1773526667 | 3.99 V | 0 V | 256 mW | 28 degC | 100975 Pa |
| 1773526620 | 3.99 V | 0 V | 234 mW | 27.7 degC | 100975 Pa |
| 1773526570 | 4 V | 0 V | 256 mW | 28 degC | 100962.5 Pa |
| 1773526525 | 4 V | 0 V | 200 mW | 27.7 degC | 100962.5 Pa |
| 1773526446 | 4.01 V | 0 V | 200 mW | 27.6 degC | 100975 Pa |
| 1773526382 | 4 V | 0 V | 226 mW | 28.2 degC | 100975 Pa |
| 1773526342 | 4 V | 0 V | 284 mW | 28.4 degC | 100962.5 Pa |
| 1773526268 | 4 V | 0 V | 204 mW | 27.8 degC | 100975 Pa |
| 1773526267 | 4 V | 0 V | 156 mW | 27.7 degC | 100962.5 Pa |
| 1773526194 | 4 V | 0 V | 214 mW | 27.8 degC | 100975 Pa |
| 1773526118 | 4 V | 0 V | 360 mW | 28.3 degC | 100975 Pa |
| 1773526074 | 4 V | 0 V | 150 mW | 27.4 degC | 100975 Pa |
| 1773526001 | 4 V | 0 V | 196 mW | 27.7 degC | 100975 Pa |
| 1773525946 | 4 V | 0 V | 236 mW | 28 degC | 100975 Pa |
| 1773525885 | 4 V | 0 V | 214 mW | 28.5 degC | 100975 Pa |
| 1773525868 | 4 V | 0 V | 380 mW | 28.3 degC | 100962.5 Pa |
| 1773525861 | 4 V | 0 V | 210 mW | 27.9 degC | 100975 Pa |
| 1773525821 | 4 V | 0 V | 174 mW | 27 degC | 100987.5 Pa |
| 1773525764 | 4 V | 0 V | 220 mW | 27.1 degC | 100975 Pa |
| 1773525703 | 4 V | 0 V | 158 mW | 27 degC | 100975 Pa |
| 1773525633 | 4 V | 0 V | 216 mW | 27 degC | 100987.5 Pa |
| 1773525575 | 4 V | 0 V | 198 mW | 27 degC | 100975 Pa |
| 1773525518 | 4 V | 0 V | 188 mW | 27.5 degC | 100975 Pa |
| 1773525516 | 4 V | 0 V | 222 mW | 27.3 degC | 100975 Pa |
| 1773525473 | 4 V | 0 V | 154 mW | 27.1 degC | 100950 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)