This is the latest recevied telemetry packets stored in our database for station/object SQ9PD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770186679 | 135 Count | 745 Count | 79 Count | 0 VDC | 0 VDC |
| 1770185778 | 133 Count | 736 Count | 78 Count | 0 VDC | 0 VDC |
| 1770184878 | 131 Count | 724 Count | 77 Count | 0 VDC | 0 VDC |
| 1770183977 | 129 Count | 714 Count | 76 Count | 0 VDC | 0 VDC |
| 1770183077 | 127 Count | 704 Count | 75 Count | 0 VDC | 0 VDC |
| 1770182176 | 125 Count | 693 Count | 74 Count | 0 VDC | 0 VDC |
| 1770181275 | 122 Count | 672 Count | 72 Count | 0 VDC | 0 VDC |
| 1770180374 | 120 Count | 651 Count | 71 Count | 0 VDC | 0 VDC |
| 1770179474 | 118 Count | 638 Count | 70 Count | 0 VDC | 0 VDC |
| 1770178573 | 115 Count | 623 Count | 68 Count | 0 VDC | 0 VDC |
| 1770177672 | 112 Count | 605 Count | 66 Count | 0 VDC | 0 VDC |
| 1770176772 | 109 Count | 586 Count | 64 Count | 0 VDC | 0 VDC |
| 1770175871 | 107 Count | 568 Count | 63 Count | 0 VDC | 0 VDC |
| 1770174971 | 104 Count | 555 Count | 61 Count | 0 VDC | 0 VDC |
| 1770174070 | 99 Count | 531 Count | 57 Count | 0 VDC | 0 VDC |
| 1770173169 | 96 Count | 509 Count | 55 Count | 0 VDC | 0 VDC |
| 1770172285 | 86 Count | 467 Count | 50 Count | 0 VDC | 0 VDC |
| 1770171384 | 83 Count | 453 Count | 48 Count | 0 VDC | 0 VDC |
| 1770170483 | 77 Count | 413 Count | 43 Count | 0 VDC | 0 VDC |
| 1770169582 | 75 Count | 405 Count | 42 Count | 0 VDC | 0 VDC |
| 1770168682 | 70 Count | 370 Count | 38 Count | 0 VDC | 0 VDC |
| 1770167781 | 62 Count | 333 Count | 31 Count | 0 VDC | 0 VDC |
| 1770166880 | 60 Count | 301 Count | 30 Count | 0 VDC | 0 VDC |
| 1770165979 | 53 Count | 259 Count | 24 Count | 0 VDC | 0 VDC |
| 1770165078 | 51 Count | 231 Count | 23 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)