This is the latest recevied telemetry packets stored in our database for station/object SQ9PD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771055222 | 175 Count | 1001 Count | 159 Count | 0 VDC | 0 VDC |
| 1771054321 | 173 Count | 970 Count | 158 Count | 0 VDC | 0 VDC |
| 1771053420 | 161 Count | 908 Count | 147 Count | 0 VDC | 0 VDC |
| 1771052520 | 151 Count | 851 Count | 138 Count | 0 VDC | 0 VDC |
| 1771051619 | 142 Count | 802 Count | 130 Count | 0 VDC | 0 VDC |
| 1771050718 | 133 Count | 736 Count | 122 Count | 0 VDC | 0 VDC |
| 1771049817 | 124 Count | 688 Count | 114 Count | 0 VDC | 0 VDC |
| 1771048916 | 113 Count | 639 Count | 104 Count | 0 VDC | 0 VDC |
| 1771048016 | 103 Count | 588 Count | 95 Count | 0 VDC | 0 VDC |
| 1771047114 | 91 Count | 537 Count | 84 Count | 0 VDC | 0 VDC |
| 1771046213 | 77 Count | 475 Count | 71 Count | 0 VDC | 0 VDC |
| 1771045313 | 63 Count | 422 Count | 58 Count | 0 VDC | 0 VDC |
| 1771044412 | 54 Count | 341 Count | 50 Count | 0 VDC | 0 VDC |
| 1771043511 | 43 Count | 270 Count | 40 Count | 0 VDC | 0 VDC |
| 1771042611 | 31 Count | 205 Count | 29 Count | 0 VDC | 0 VDC |
| 1771042603 | 20 Count | 139 Count | 19 Count | 0 VDC | 0 VDC |
| 1771041711 | 8 Count | 52 Count | 8 Count | 0 VDC | 0 VDC |
| 1771041710 | 20 Count | 139 Count | 19 Count | 0 VDC | 0 VDC |
| 1771040809 | 8 Count | 52 Count | 8 Count | 0 VDC | 0 VDC |
| 1771039909 | 202 Count | 1006 Count | 167 Count | 0 VDC | 0 VDC |
| 1771039008 | 188 Count | 951 Count | 154 Count | 0 VDC | 0 VDC |
| 1771038107 | 179 Count | 906 Count | 146 Count | 0 VDC | 0 VDC |
| 1771037207 | 169 Count | 855 Count | 137 Count | 0 VDC | 0 VDC |
| 1771036322 | 156 Count | 818 Count | 129 Count | 0 VDC | 0 VDC |
| 1771035421 | 144 Count | 774 Count | 118 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)