This is the latest recevied telemetry packets stored in our database for station/object 2M0JUM-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782057875 | 783 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782057272 | 782 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782056668 | 781 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782056066 | 780 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782055462 | 779 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782054859 | 778 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782054256 | 777 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782053653 | 776 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782053050 | 775 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782052447 | 774 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782051844 | 773 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782051241 | 772 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782050638 | 771 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782050035 | 770 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782049432 | 769 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782048829 | 768 Count | 125 Count | 70 Count | 0 VDC | 0 VDC |
| 1782026736 | 727 Count | 121 Count | 66 Count | 0 VDC | 0 VDC |
| 1782026133 | 726 Count | 121 Count | 66 Count | 0 VDC | 0 VDC |
| 1782025530 | 725 Count | 121 Count | 66 Count | 0 VDC | 0 VDC |
| 1782024927 | 724 Count | 121 Count | 66 Count | 0 VDC | 0 VDC |
| 1782024324 | 723 Count | 121 Count | 66 Count | 0 VDC | 0 VDC |
| 1782023721 | 722 Count | 121 Count | 66 Count | 0 VDC | 0 VDC |
| 1782023118 | 721 Count | 121 Count | 66 Count | 0 VDC | 0 VDC |
| 1782022515 | 720 Count | 121 Count | 66 Count | 0 VDC | 0 VDC |
| 1782021912 | 719 Count | 121 Count | 66 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)