This is the latest recevied telemetry packets stored in our database for station/object SQ8BS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771019571 | 0 Count | 34 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1771019271 | 0 Count | 24 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1771018971 | 0 Count | 13 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1771018671 | 0 Count | 1006 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771018371 | 0 Count | 996 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771018071 | 0 Count | 983 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771017771 | 0 Count | 963 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1771017471 | 0 Count | 954 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1771017171 | 0 Count | 942 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1771016871 | 0 Count | 925 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1771016570 | 0 Count | 917 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1771016270 | 0 Count | 904 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771015970 | 0 Count | 888 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771015670 | 0 Count | 879 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1771015370 | 0 Count | 868 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771015070 | 0 Count | 861 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771014770 | 0 Count | 858 Count | 0 Count | 4.43 VDC | 0 VDC |
| 1771014476 | 0 Count | 852 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1771014175 | 0 Count | 843 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771013875 | 0 Count | 841 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1771013575 | 0 Count | 836 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1771013275 | 0 Count | 829 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1771012975 | 0 Count | 825 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1771012675 | 0 Count | 819 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1771012375 | 0 Count | 812 Count | 0 Count | 4.51 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)