This is the latest recevied telemetry packets stored in our database for station/object SP5XTF-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786996876 | 923 Count | 733 Count | 210 Count | 0 VDC | 0 VDC |
| 1786996802 | 922 Count | 733 Count | 210 Count | 0 VDC | 0 VDC |
| 1786996786 | 921 Count | 733 Count | 210 Count | 0 VDC | 0 VDC |
| 1786996492 | 920 Count | 732 Count | 210 Count | 0 VDC | 0 VDC |
| 1786996468 | 919 Count | 732 Count | 210 Count | 0 VDC | 0 VDC |
| 1786996376 | 918 Count | 732 Count | 210 Count | 0 VDC | 0 VDC |
| 1786995930 | 917 Count | 732 Count | 210 Count | 0 VDC | 0 VDC |
| 1786995723 | 916 Count | 732 Count | 210 Count | 0 VDC | 0 VDC |
| 1786994822 | 914 Count | 731 Count | 209 Count | 0 VDC | 0 VDC |
| 1786994757 | 913 Count | 731 Count | 209 Count | 0 VDC | 0 VDC |
| 1786994299 | 912 Count | 731 Count | 209 Count | 0 VDC | 0 VDC |
| 1786993398 | 911 Count | 730 Count | 209 Count | 0 VDC | 0 VDC |
| 1786993394 | 910 Count | 730 Count | 209 Count | 0 VDC | 0 VDC |
| 1786993264 | 898 Count | 730 Count | 209 Count | 0 VDC | 0 VDC |
| 1786993195 | 897 Count | 730 Count | 209 Count | 0 VDC | 0 VDC |
| 1786992295 | 896 Count | 729 Count | 209 Count | 0 VDC | 0 VDC |
| 1786991394 | 895 Count | 728 Count | 209 Count | 0 VDC | 0 VDC |
| 1786990493 | 894 Count | 725 Count | 209 Count | 0 VDC | 0 VDC |
| 1786989593 | 892 Count | 714 Count | 208 Count | 0 VDC | 0 VDC |
| 1786988692 | 891 Count | 710 Count | 208 Count | 0 VDC | 0 VDC |
| 1786987792 | 890 Count | 703 Count | 208 Count | 0 VDC | 0 VDC |
| 1786986891 | 889 Count | 693 Count | 208 Count | 0 VDC | 0 VDC |
| 1786985991 | 888 Count | 691 Count | 208 Count | 0 VDC | 0 VDC |
| 1786985090 | 887 Count | 687 Count | 208 Count | 0 VDC | 0 VDC |
| 1786984189 | 886 Count | 685 Count | 208 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)