This is the latest recevied telemetry packets stored in our database for station/object SP5XTF-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781389725 | 893 Count | 521 Count | 419 Count | 0 VDC | 0 VDC |
| 1781387925 | 891 Count | 520 Count | 418 Count | 0 VDC | 0 VDC |
| 1781386124 | 890 Count | 520 Count | 418 Count | 0 VDC | 0 VDC |
| 1781384324 | 889 Count | 519 Count | 418 Count | 0 VDC | 0 VDC |
| 1781382522 | 888 Count | 519 Count | 418 Count | 0 VDC | 0 VDC |
| 1781380722 | 886 Count | 516 Count | 417 Count | 0 VDC | 0 VDC |
| 1781378921 | 883 Count | 513 Count | 415 Count | 0 VDC | 0 VDC |
| 1781377120 | 881 Count | 512 Count | 414 Count | 0 VDC | 0 VDC |
| 1781375320 | 880 Count | 511 Count | 414 Count | 0 VDC | 0 VDC |
| 1781373527 | 878 Count | 509 Count | 413 Count | 0 VDC | 0 VDC |
| 1781371726 | 877 Count | 509 Count | 413 Count | 0 VDC | 0 VDC |
| 1781369926 | 876 Count | 509 Count | 413 Count | 0 VDC | 0 VDC |
| 1781368125 | 875 Count | 507 Count | 413 Count | 0 VDC | 0 VDC |
| 1781366325 | 874 Count | 507 Count | 413 Count | 0 VDC | 0 VDC |
| 1781364524 | 872 Count | 506 Count | 412 Count | 0 VDC | 0 VDC |
| 1781362723 | 871 Count | 506 Count | 412 Count | 0 VDC | 0 VDC |
| 1781360923 | 870 Count | 506 Count | 412 Count | 0 VDC | 0 VDC |
| 1781359122 | 869 Count | 506 Count | 412 Count | 0 VDC | 0 VDC |
| 1781357321 | 867 Count | 505 Count | 411 Count | 0 VDC | 0 VDC |
| 1781355521 | 866 Count | 505 Count | 411 Count | 0 VDC | 0 VDC |
| 1781353720 | 865 Count | 504 Count | 411 Count | 0 VDC | 0 VDC |
| 1781351928 | 864 Count | 504 Count | 411 Count | 0 VDC | 0 VDC |
| 1781350128 | 863 Count | 504 Count | 411 Count | 0 VDC | 0 VDC |
| 1781348327 | 861 Count | 503 Count | 410 Count | 0 VDC | 0 VDC |
| 1781346526 | 859 Count | 502 Count | 409 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)