This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782063557 | 158 Count | 357 Count | 0 Count | 0 VDC | 0 VDC |
| 1782061756 | 154 Count | 348 Count | 0 Count | 0 VDC | 0 VDC |
| 1782059955 | 150 Count | 322 Count | 0 Count | 0 VDC | 0 VDC |
| 1782058155 | 146 Count | 312 Count | 0 Count | 0 VDC | 0 VDC |
| 1782056354 | 142 Count | 278 Count | 0 Count | 0 VDC | 0 VDC |
| 1782054553 | 138 Count | 270 Count | 0 Count | 0 VDC | 0 VDC |
| 1782052752 | 134 Count | 265 Count | 0 Count | 0 VDC | 0 VDC |
| 1782050960 | 130 Count | 260 Count | 0 Count | 0 VDC | 0 VDC |
| 1782049159 | 126 Count | 255 Count | 0 Count | 0 VDC | 0 VDC |
| 1782047358 | 122 Count | 250 Count | 0 Count | 0 VDC | 0 VDC |
| 1782045558 | 118 Count | 245 Count | 0 Count | 0 VDC | 0 VDC |
| 1782043757 | 114 Count | 240 Count | 0 Count | 0 VDC | 0 VDC |
| 1782041956 | 110 Count | 231 Count | 0 Count | 0 VDC | 0 VDC |
| 1782040155 | 106 Count | 212 Count | 0 Count | 0 VDC | 0 VDC |
| 1782038355 | 102 Count | 205 Count | 0 Count | 0 VDC | 0 VDC |
| 1782036554 | 98 Count | 198 Count | 0 Count | 0 VDC | 0 VDC |
| 1782034753 | 94 Count | 191 Count | 0 Count | 0 VDC | 0 VDC |
| 1782032952 | 90 Count | 160 Count | 0 Count | 0 VDC | 0 VDC |
| 1782031151 | 86 Count | 155 Count | 0 Count | 0 VDC | 0 VDC |
| 1782029357 | 82 Count | 150 Count | 0 Count | 0 VDC | 0 VDC |
| 1782027557 | 78 Count | 145 Count | 0 Count | 0 VDC | 0 VDC |
| 1782025756 | 74 Count | 140 Count | 0 Count | 0 VDC | 0 VDC |
| 1782023955 | 70 Count | 135 Count | 0 Count | 0 VDC | 0 VDC |
| 1782022154 | 66 Count | 128 Count | 0 Count | 0 VDC | 0 VDC |
| 1782020354 | 62 Count | 114 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)