This is the latest recevied telemetry packets stored in our database for station/object SR7NSI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775149533 | 258 Count | 389 Count | 74 Count | 0 VDC | 0 VDC |
| 1775148931 | 257 Count | 389 Count | 74 Count | 0 VDC | 0 VDC |
| 1775148331 | 256 Count | 384 Count | 74 Count | 0 VDC | 0 VDC |
| 1775147730 | 255 Count | 382 Count | 74 Count | 0 VDC | 0 VDC |
| 1775147129 | 254 Count | 381 Count | 74 Count | 0 VDC | 0 VDC |
| 1775146528 | 253 Count | 379 Count | 74 Count | 0 VDC | 0 VDC |
| 1775145927 | 252 Count | 377 Count | 74 Count | 0 VDC | 0 VDC |
| 1775145326 | 251 Count | 376 Count | 74 Count | 0 VDC | 0 VDC |
| 1775144725 | 250 Count | 375 Count | 74 Count | 0 VDC | 0 VDC |
| 1775144124 | 249 Count | 373 Count | 74 Count | 0 VDC | 0 VDC |
| 1775143524 | 248 Count | 373 Count | 74 Count | 0 VDC | 0 VDC |
| 1775142923 | 247 Count | 371 Count | 74 Count | 0 VDC | 0 VDC |
| 1775142322 | 246 Count | 369 Count | 74 Count | 0 VDC | 0 VDC |
| 1775141721 | 245 Count | 368 Count | 74 Count | 0 VDC | 0 VDC |
| 1775141120 | 244 Count | 366 Count | 74 Count | 0 VDC | 0 VDC |
| 1775140519 | 243 Count | 365 Count | 74 Count | 0 VDC | 0 VDC |
| 1775139317 | 241 Count | 362 Count | 74 Count | 0 VDC | 0 VDC |
| 1775138716 | 240 Count | 360 Count | 74 Count | 0 VDC | 0 VDC |
| 1775138116 | 239 Count | 359 Count | 74 Count | 0 VDC | 0 VDC |
| 1775137515 | 238 Count | 357 Count | 74 Count | 0 VDC | 0 VDC |
| 1775136914 | 237 Count | 355 Count | 74 Count | 0 VDC | 0 VDC |
| 1775136313 | 236 Count | 354 Count | 74 Count | 0 VDC | 0 VDC |
| 1775135712 | 235 Count | 352 Count | 74 Count | 0 VDC | 0 VDC |
| 1775135111 | 234 Count | 350 Count | 74 Count | 0 VDC | 0 VDC |
| 1775134511 | 233 Count | 349 Count | 74 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)