This is the latest recevied telemetry packets stored in our database for station/object SR7NSI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783092052 | 162 Count | 319 Count | 40 Count | 0 VDC | 0 VDC |
| 1783091451 | 161 Count | 318 Count | 40 Count | 0 VDC | 0 VDC |
| 1783090851 | 160 Count | 317 Count | 40 Count | 0 VDC | 0 VDC |
| 1783090249 | 159 Count | 311 Count | 40 Count | 0 VDC | 0 VDC |
| 1783089648 | 158 Count | 310 Count | 40 Count | 0 VDC | 0 VDC |
| 1783089047 | 157 Count | 309 Count | 40 Count | 0 VDC | 0 VDC |
| 1783088446 | 156 Count | 308 Count | 40 Count | 0 VDC | 0 VDC |
| 1783087846 | 155 Count | 307 Count | 40 Count | 0 VDC | 0 VDC |
| 1783087245 | 154 Count | 306 Count | 40 Count | 0 VDC | 0 VDC |
| 1783086644 | 153 Count | 305 Count | 40 Count | 0 VDC | 0 VDC |
| 1783086043 | 152 Count | 304 Count | 40 Count | 0 VDC | 0 VDC |
| 1783085442 | 151 Count | 303 Count | 40 Count | 0 VDC | 0 VDC |
| 1783084841 | 150 Count | 302 Count | 40 Count | 0 VDC | 0 VDC |
| 1783084240 | 149 Count | 301 Count | 40 Count | 0 VDC | 0 VDC |
| 1783083670 | 144 Count | 300 Count | 40 Count | 0 VDC | 0 VDC |
| 1783083070 | 143 Count | 299 Count | 40 Count | 0 VDC | 0 VDC |
| 1783082469 | 142 Count | 298 Count | 40 Count | 0 VDC | 0 VDC |
| 1783081868 | 141 Count | 297 Count | 40 Count | 0 VDC | 0 VDC |
| 1783081267 | 140 Count | 296 Count | 40 Count | 0 VDC | 0 VDC |
| 1783080666 | 139 Count | 295 Count | 40 Count | 0 VDC | 0 VDC |
| 1783080065 | 138 Count | 294 Count | 40 Count | 0 VDC | 0 VDC |
| 1783079464 | 137 Count | 293 Count | 40 Count | 0 VDC | 0 VDC |
| 1783078863 | 136 Count | 292 Count | 40 Count | 0 VDC | 0 VDC |
| 1783078263 | 135 Count | 291 Count | 40 Count | 0 VDC | 0 VDC |
| 1783077662 | 134 Count | 290 Count | 40 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)