This is the latest recevied telemetry packets stored in our database for station/object SR7NSI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764945298 | 772 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764944698 | 771 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764944097 | 770 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764943496 | 769 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764942895 | 768 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764942296 | 767 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764941693 | 766 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764941092 | 765 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764940492 | 764 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764939891 | 763 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764939289 | 762 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764938688 | 761 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764938087 | 760 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764937487 | 759 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764936886 | 758 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764936285 | 757 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764935684 | 756 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764935083 | 755 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764934482 | 754 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764933881 | 753 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764933280 | 752 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764932680 | 751 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764932079 | 750 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764931478 | 749 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
| 1764930877 | 748 Count | 127 Count | 23 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)