This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775170376 | 108 Count | 497 Count | 77 Count | 4.09 VDC | 0 VDC |
| 1775169476 | 106 Count | 485 Count | 76 Count | 4.09 VDC | 0 VDC |
| 1775168574 | 105 Count | 478 Count | 76 Count | 4.09 VDC | 0 VDC |
| 1775167677 | 102 Count | 467 Count | 74 Count | 4.09 VDC | 0 VDC |
| 1775166777 | 100 Count | 457 Count | 73 Count | 4.09 VDC | 0 VDC |
| 1775165877 | 99 Count | 448 Count | 73 Count | 4.09 VDC | 0 VDC |
| 1775164976 | 97 Count | 438 Count | 72 Count | 4.09 VDC | 0 VDC |
| 1775164078 | 94 Count | 430 Count | 70 Count | 4.09 VDC | 0 VDC |
| 1775163177 | 92 Count | 420 Count | 69 Count | 4.09 VDC | 0 VDC |
| 1775162276 | 89 Count | 410 Count | 67 Count | 4.09 VDC | 0 VDC |
| 1775161378 | 88 Count | 404 Count | 67 Count | 4.1 VDC | 0 VDC |
| 1775160478 | 86 Count | 396 Count | 66 Count | 4.09 VDC | 0 VDC |
| 1775159577 | 85 Count | 389 Count | 66 Count | 4.1 VDC | 0 VDC |
| 1775158679 | 82 Count | 377 Count | 64 Count | 4.1 VDC | 0 VDC |
| 1775157779 | 80 Count | 356 Count | 63 Count | 4.1 VDC | 0 VDC |
| 1775156879 | 74 Count | 327 Count | 58 Count | 4.1 VDC | 0 VDC |
| 1775155980 | 72 Count | 312 Count | 57 Count | 4.1 VDC | 0 VDC |
| 1775155086 | 70 Count | 307 Count | 56 Count | 4.1 VDC | 0 VDC |
| 1775154181 | 65 Count | 281 Count | 52 Count | 4.1 VDC | 0 VDC |
| 1775153289 | 62 Count | 256 Count | 50 Count | 4.1 VDC | 0 VDC |
| 1775152381 | 61 Count | 239 Count | 50 Count | 4.1 VDC | 0 VDC |
| 1775151482 | 51 Count | 223 Count | 41 Count | 4.11 VDC | 1.2 VDC |
| 1775150581 | 43 Count | 207 Count | 34 Count | 4.11 VDC | 2.4 VDC |
| 1775149681 | 36 Count | 192 Count | 28 Count | 4.11 VDC | 4.34 VDC |
| 1775148782 | 19 Count | 164 Count | 12 Count | 4.11 VDC | 4.32 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)