This is the latest recevied telemetry packets stored in our database for station/object SQ8MAE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787118121 | 936 Count | 929 Count | 646 Count | 4.1 VDC | 2.92 VDC |
| 1787117879 | 933 Count | 925 Count | 645 Count | 4.1 VDC | 2.92 VDC |
| 1787117638 | 929 Count | 921 Count | 643 Count | 4.1 VDC | 2.92 VDC |
| 1787117396 | 924 Count | 915 Count | 640 Count | 4.09 VDC | 2.9 VDC |
| 1787117154 | 919 Count | 910 Count | 637 Count | 4.01 VDC | 2.18 VDC |
| 1787116913 | 916 Count | 904 Count | 636 Count | 4.01 VDC | 2.18 VDC |
| 1787116671 | 911 Count | 898 Count | 633 Count | 4.01 VDC | 2.18 VDC |
| 1787116430 | 907 Count | 896 Count | 631 Count | 4.01 VDC | 2.18 VDC |
| 1787116188 | 904 Count | 891 Count | 630 Count | 4.01 VDC | 2.18 VDC |
| 1787115947 | 899 Count | 885 Count | 627 Count | 4.01 VDC | 2.18 VDC |
| 1787115705 | 892 Count | 879 Count | 622 Count | 4.01 VDC | 2.18 VDC |
| 1787115464 | 888 Count | 871 Count | 620 Count | 4.01 VDC | 2.18 VDC |
| 1787115222 | 882 Count | 865 Count | 616 Count | 4.01 VDC | 2.18 VDC |
| 1787114980 | 872 Count | 854 Count | 608 Count | 4.01 VDC | 2.18 VDC |
| 1787114739 | 862 Count | 845 Count | 600 Count | 3.99 VDC | 0.14 VDC |
| 1787114493 | 853 Count | 837 Count | 593 Count | 4 VDC | 0.14 VDC |
| 1787114397 | 848 Count | 835 Count | 593 Count | 4.01 VDC | 2.18 VDC |
| 1787114155 | 845 Count | 832 Count | 592 Count | 4.02 VDC | 2.18 VDC |
| 1787113914 | 834 Count | 821 Count | 583 Count | 4.02 VDC | 2.18 VDC |
| 1787113672 | 823 Count | 811 Count | 574 Count | 4.02 VDC | 2.18 VDC |
| 1787113431 | 807 Count | 796 Count | 560 Count | 4.02 VDC | 2.18 VDC |
| 1787113189 | 800 Count | 785 Count | 555 Count | 4.02 VDC | 2.18 VDC |
| 1787112947 | 786 Count | 771 Count | 543 Count | 4.02 VDC | 2.18 VDC |
| 1787112706 | 767 Count | 752 Count | 526 Count | 4.02 VDC | 2.18 VDC |
| 1787112464 | 751 Count | 736 Count | 512 Count | 4.02 VDC | 2.18 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)