This is the latest recevied telemetry packets stored in our database for station/object SP9WJ-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | current* | temp* | humidity* | pressure* | voltage* |
---|---|---|---|---|---|
1715895244 | 0.24 mA | 15 C | 39 % | 152 hPa | 3.33 V |
1715893397 | 0.22 mA | 16 C | 38 % | 155 hPa | 3.31 V |
1715890625 | 0.2 mA | 16 C | 42 % | 161 hPa | 3.33 V |
1715889701 | 0.25 mA | 16 C | 43 % | 154 hPa | 3.33 V |
1715888776 | 0.2 mA | 17 C | 42 % | 152 hPa | 3.33 V |
1715887852 | 0.24 mA | 17 C | 42 % | 151 hPa | 3.33 V |
1715886928 | 1.07 mA | 17 C | 39 % | 149 hPa | 3.34 V |
1715886004 | 1.27 mA | 18 C | 35 % | 141 hPa | 3.34 V |
1715885673 | 1.37 mA | 18 C | 34 % | 138 hPa | 3.48 V |
1715884773 | 4 mA | 18 C | 32 % | 125 hPa | 3.55 V |
1715882337 | 1.85 mA | 19 C | 31 % | 96 hPa | 3.55 V |
1715880454 | 0.22 mA | 20 C | 30 % | 98 hPa | 3.34 V |
1715878603 | 0.52 mA | 21 C | 29 % | 88 hPa | 3.34 V |
1715877677 | 0.39 mA | 21 C | 29 % | 87 hPa | 3.34 V |
1715876752 | 0.24 mA | 21 C | 29 % | 83 hPa | 3.34 V |
1715874900 | 0.83 mA | 22 C | 26 % | 93 hPa | 3.36 V |
1715873975 | 0.35 mA | 23 C | 24 % | 96 hPa | 3.36 V |
1715873049 | 1.05 mA | 23 C | 24 % | 105 hPa | 3.36 V |
1715872123 | 2.46 mA | 24 C | 22 % | 105 hPa | 3.36 V |
1715871196 | 2.24 mA | 25 C | 19 % | 103 hPa | 3.36 V |
1715869341 | 1.37 mA | 27 C | 16 % | 114 hPa | 3.36 V |
1715867486 | 0.2 mA | 25 C | 20 % | 123 hPa | 3.36 V |
1715866560 | 1.68 mA | 26 C | 20 % | 132 hPa | 3.36 V |
1715865658 | 0.22 mA | 25 C | 20 % | 144 hPa | 3.36 V |
1715864769 | 2.02 mA | 26 C | 17 % | 143 hPa | 3.5 V |
*Used Equation Coefficients:
current: 0, 0.01569, 0
temp: 0, 1, -128
humidity: 0, 1, 0
pressure: 0, 1, 0
voltage: 0, 0.01569, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)