This is the latest recevied telemetry packets stored in our database for station/object SR2CA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764992680 | 152 Count | 845 Count | 4 Count | 0 VDC | 0 VDC |
| 1764990999 | 151 Count | 842 Count | 4 Count | 0 VDC | 0 VDC |
| 1764989319 | 150 Count | 840 Count | 4 Count | 0 VDC | 0 VDC |
| 1764987638 | 148 Count | 838 Count | 4 Count | 0 VDC | 0 VDC |
| 1764986212 | 144 Count | 835 Count | 4 Count | 0 VDC | 0 VDC |
| 1764984532 | 143 Count | 832 Count | 4 Count | 0 VDC | 0 VDC |
| 1764982844 | 142 Count | 830 Count | 4 Count | 0 VDC | 0 VDC |
| 1764981163 | 141 Count | 827 Count | 4 Count | 0 VDC | 0 VDC |
| 1764979483 | 140 Count | 821 Count | 4 Count | 0 VDC | 0 VDC |
| 1764977802 | 139 Count | 819 Count | 4 Count | 0 VDC | 0 VDC |
| 1764976121 | 138 Count | 817 Count | 4 Count | 0 VDC | 0 VDC |
| 1764974440 | 137 Count | 816 Count | 4 Count | 0 VDC | 0 VDC |
| 1764972759 | 136 Count | 814 Count | 4 Count | 0 VDC | 0 VDC |
| 1764971079 | 135 Count | 809 Count | 4 Count | 0 VDC | 0 VDC |
| 1764969398 | 134 Count | 806 Count | 4 Count | 0 VDC | 0 VDC |
| 1764967718 | 133 Count | 804 Count | 4 Count | 0 VDC | 0 VDC |
| 1764966036 | 131 Count | 803 Count | 4 Count | 0 VDC | 0 VDC |
| 1764964605 | 127 Count | 801 Count | 4 Count | 0 VDC | 0 VDC |
| 1764962924 | 126 Count | 798 Count | 4 Count | 0 VDC | 0 VDC |
| 1764961243 | 125 Count | 797 Count | 4 Count | 0 VDC | 0 VDC |
| 1764959563 | 124 Count | 794 Count | 4 Count | 0 VDC | 0 VDC |
| 1764957882 | 123 Count | 787 Count | 4 Count | 0 VDC | 0 VDC |
| 1764956201 | 122 Count | 785 Count | 4 Count | 0 VDC | 0 VDC |
| 1764954520 | 121 Count | 782 Count | 4 Count | 0 VDC | 0 VDC |
| 1764952840 | 120 Count | 780 Count | 4 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)