This is the latest recevied telemetry packets stored in our database for station/object SQ7PKP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775143489 | 196 Count | 434 Count | 82 Count | 0 VDC | 0 VDC |
| 1775142888 | 194 Count | 428 Count | 81 Count | 0 VDC | 0 VDC |
| 1775142287 | 192 Count | 426 Count | 80 Count | 0 VDC | 0 VDC |
| 1775141687 | 191 Count | 424 Count | 80 Count | 0 VDC | 0 VDC |
| 1775141084 | 189 Count | 417 Count | 79 Count | 0 VDC | 0 VDC |
| 1775140483 | 187 Count | 409 Count | 78 Count | 0 VDC | 0 VDC |
| 1775139883 | 185 Count | 406 Count | 77 Count | 0 VDC | 0 VDC |
| 1775139282 | 184 Count | 396 Count | 77 Count | 0 VDC | 0 VDC |
| 1775138681 | 182 Count | 386 Count | 76 Count | 0 VDC | 0 VDC |
| 1775138080 | 180 Count | 383 Count | 75 Count | 0 VDC | 0 VDC |
| 1775137480 | 179 Count | 382 Count | 75 Count | 0 VDC | 0 VDC |
| 1775136878 | 177 Count | 380 Count | 74 Count | 0 VDC | 0 VDC |
| 1775136277 | 175 Count | 376 Count | 73 Count | 0 VDC | 0 VDC |
| 1775135676 | 174 Count | 372 Count | 73 Count | 0 VDC | 0 VDC |
| 1775135075 | 172 Count | 369 Count | 72 Count | 0 VDC | 0 VDC |
| 1775134475 | 170 Count | 366 Count | 71 Count | 0 VDC | 0 VDC |
| 1775133874 | 169 Count | 365 Count | 71 Count | 0 VDC | 0 VDC |
| 1775132672 | 165 Count | 355 Count | 69 Count | 0 VDC | 0 VDC |
| 1775131470 | 162 Count | 351 Count | 68 Count | 0 VDC | 0 VDC |
| 1775130870 | 160 Count | 347 Count | 67 Count | 0 VDC | 0 VDC |
| 1775130269 | 159 Count | 345 Count | 67 Count | 0 VDC | 0 VDC |
| 1775129668 | 157 Count | 343 Count | 66 Count | 0 VDC | 0 VDC |
| 1775129067 | 155 Count | 339 Count | 65 Count | 0 VDC | 0 VDC |
| 1775128467 | 154 Count | 331 Count | 65 Count | 0 VDC | 0 VDC |
| 1775127866 | 152 Count | 328 Count | 64 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)