This is the latest recevied telemetry packets stored in our database for station/object OK1OBR-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771007975 | 971 Count | 562 Count | 322 Count | 0 VDC | 0 VDC |
| 1771006171 | 970 Count | 561 Count | 322 Count | 0 VDC | 0 VDC |
| 1771004367 | 958 Count | 550 Count | 311 Count | 0 VDC | 0 VDC |
| 1771002563 | 956 Count | 548 Count | 310 Count | 0 VDC | 0 VDC |
| 1771000759 | 955 Count | 548 Count | 310 Count | 0 VDC | 0 VDC |
| 1770998955 | 954 Count | 547 Count | 310 Count | 0 VDC | 0 VDC |
| 1770997152 | 943 Count | 537 Count | 300 Count | 0 VDC | 0 VDC |
| 1770995348 | 942 Count | 536 Count | 300 Count | 0 VDC | 0 VDC |
| 1770993544 | 941 Count | 536 Count | 300 Count | 0 VDC | 0 VDC |
| 1770991740 | 940 Count | 535 Count | 300 Count | 0 VDC | 0 VDC |
| 1770989936 | 939 Count | 535 Count | 300 Count | 0 VDC | 0 VDC |
| 1770968336 | 927 Count | 534 Count | 300 Count | 0 VDC | 0 VDC |
| 1770966577 | 926 Count | 533 Count | 300 Count | 0 VDC | 0 VDC |
| 1770964773 | 925 Count | 533 Count | 300 Count | 0 VDC | 0 VDC |
| 1770962969 | 924 Count | 533 Count | 300 Count | 0 VDC | 0 VDC |
| 1770961165 | 923 Count | 533 Count | 300 Count | 0 VDC | 0 VDC |
| 1770959361 | 922 Count | 532 Count | 300 Count | 0 VDC | 0 VDC |
| 1770957557 | 921 Count | 532 Count | 300 Count | 0 VDC | 0 VDC |
| 1770955753 | 920 Count | 531 Count | 300 Count | 0 VDC | 0 VDC |
| 1770953949 | 919 Count | 531 Count | 300 Count | 0 VDC | 0 VDC |
| 1770952145 | 918 Count | 531 Count | 300 Count | 0 VDC | 0 VDC |
| 1770950342 | 917 Count | 531 Count | 300 Count | 0 VDC | 0 VDC |
| 1770948538 | 916 Count | 531 Count | 300 Count | 0 VDC | 0 VDC |
| 1770946734 | 915 Count | 531 Count | 300 Count | 0 VDC | 0 VDC |
| 1770944977 | 914 Count | 530 Count | 300 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)